• Home /
• Industrial Automation /
• Robotics /
• Robot Parts and Accessories

Have a question? Call us now at +91 9650660070

Robot Parts And Accessories

Showing 40 out of 603 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 60 days

TECHDELIVERS Nylon 10 x 4.5 inch 1045 1045R CW CCW Propeller Black for DJI F450 500 F550 FPV Multi-Copter 5 Pair Combo

By TECHDELIVERS

Pack of 10 piece

₹601   ₹699

You save ₹98!

14.02% OFF

The TECHDELIVERS Nylon 10 x 4.5 inch 1045 1045R CW CCW Propeller Black for DJI F450 500 F550 FPV Multi-Copter 5 Pair Combo, a propeller is a type of rotary device that consists of blades mounted around a central hub. When the propeller spins, it generates thrust by creating a difference in air pressure between its front and rear surfaces. This thrust is used to propel aircraft, watercraft, and even some land-based vehicles. Propellers are commonly used in various applications to achieve propulsion and generate movement. Propellers: Blades: The blades of a propeller are designed to generate lift and thrust as they cut through a fluid medium, such as air or water. Hub: The hub is the central part of the propeller that connects the blades. It houses the mechanisms that transmit the rotational force to the blades. Rotation: When the propeller rotates, it pushes against the surrounding fluid (air or water), creating a force in the opposite direction. This force propels the vehicle forward. Pitch: The pitch of a propeller refers to the angle at which the blades are set relative to the hub. It determines how much the propeller "bites" into the fluid and influences the amount of thrust generated. Thrust: The forward force generated by the propeller's rotation is known as thrust. It's the force that moves a vehicle in the desired direction. Applications of Propellers: Aircraft: Propellers are commonly used on small aircraft, such as general aviation planes and some helicopters. They generate the necessary thrust for flight. Boats and Ships: Watercraft, from small boats to large ships, use propellers to move through water efficiently. Propellers for boats are also called marine propellers or boat propellers. Underwater Vehicles: Submarines, remotely operated vehicles (ROVs), and underwater drones use propellers to navigate underwater. Drones: Many drones, especially multirotor drones, use propellers to generate lift and control their movement. Land Vehicles: Some land vehicles, such as hovercraft and certain types of amphibious vehicles, use propellers to move over water or uneven terrain. Fans and Ventilation: Industrial fans and ventilation systems also use propeller-like designs to move air and provide cooling. Overall, propellers are essential components for generating thrust and propulsion in a wide range of vehicles and devices that operate in fluid environments, whether in the air, water, or even on the ground.

Add to Cart Buy Now

Ships within 24 hrs

Invento ISC 235 Small Loudspeaker Stereo Audio Speaker 2040 4Ohm 2W for Laptop DIY Projects Replace

By Invento

₹353   ₹590

You save ₹237!

40.17% OFF

Add to Cart Buy Now

Ships within 24 hrs

EASY ELECTRONICS Heating Coils Resistor Nichrome Wire for Foam Cutting, 24 SWG (1 m)

By EASY ELECTRONICS

₹93   ₹299

You save ₹206!

68.9% OFF

The Easy Electronics Heating Coils Resistor Nichrome Wire, a reliable and efficient solution for foam cutting and other heating applications. This high-quality wire is designed to provide consistent and controlled heating, making it ideal for both hobbyists and professionals. The Easy Electronics Heating Coils Resistor Nichrome Wire is made from premium-grade nichrome alloy, known for its excellent heating properties and durability. With a wire gauge of 24 SWG (Standard Wire Gauge), this wire offers the perfect balance of strength and flexibility for various applications. Measuring 1 meter in length, this wire provides ample material for creating heating coils for foam cutting or other heating projects. It is specifically designed to generate heat quickly and evenly, allowing for precise and efficient foam cutting without compromising the material's integrity. The Easy Electronics Heating Coils Resistor Nichrome Wire is easy to work with and can be easily shaped into the desired coil configuration. Simply measure and cut the wire to the desired length, and then shape it into the desired coil shape using pliers or a coil winding tool. The wire maintains its shape well and ensures consistent heating performance. This nichrome wire is highly resistant to oxidation and corrosion, ensuring long-lasting performance even under high temperatures. It can withstand the demands of continuous heating without compromising its efficiency or structural integrity. The Easy Electronics Heating Coils Resistor Nichrome Wire and elevate your foam cutting and heating projects to the next level. With its high-quality construction, consistent heating performance, and versatility, this wire is a valuable asset for anyone working with foam or requiring controlled heating applications. Achieve precision and efficiency in your projects with the Easy Electronics Heating Coils Resistor Nichrome Wire.

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS Copper Clad Board for PCB making Single Sided, Phenolic

By TECHDELIVERS

₹188 - ₹376

You save ₹1,741!

87.09% OFF

The TECHDELIVERS Copper Clad Board for PCB making is a single-sided phenolic board specifically designed for creating custom printed circuit boards (PCBs) in electronic projects. This type of board is commonly used by hobbyists, electronics enthusiasts, and professionals who need a reliable substrate for assembling and soldering electronic components.The key feature of the TECHDELIVERS Copper Clad Board is its construction using a phenolic resin substrate with a thin layer of copper laminated onto one side. The copper layer serves as the conductive trace material for creating circuit pathways, while the phenolic substrate provides structural support and insulation between the copper traces.One of the advantages of using a single-sided copper clad board is its simplicity and affordability, making it ideal for prototyping and small-scale projects. The single-sided design means that components and traces are only soldered onto one side of the board, simplifying the assembly process and reducing complexity.The copper layer on the board is typically pre-etched with a copper pattern or grid, providing a template for creating custom circuit designs. Users can use etching techniques such as chemical etching or mechanical milling to remove unwanted copper and create the desired circuit layout.The TECHDELIVERS Copper Clad Board is also designed with convenience in mind. It comes in standard sizes and thicknesses, making it compatible with common PCB design software and fabrication techniques. This standardization ensures compatibility with drill sizes, component placements, and soldering processes.

Suitable For : PCB making Single Sided

Type of Product : Copper Clad Board

Material : Phenolic

Care Instructions : Always use mask while cutting PCBs

Explore other Variants (4)

Ships within 24 hrs

TECHDELIVERS 12-24 V 775 DC High-speed Large Torque Motor with Fan Blade on armature for DIY Model Car/Small Drill Micro-machine, 0308YHUZIH7

By TECHDELIVERS

₹329   ₹399

You save ₹70!

17.54% OFF

The TECHDELIVERS 12-24 V 775 DC High-speed Large Torque Motor with Fan Blade on armature for DIY Model Car/Small Drill Micro-machine refers to a type of electric motor that is connected to a fan blade. The motor's primary purpose is to rotate the fan blade and create airflow or ventilation. This setup is commonly found in various appliances and equipment where cooling or air circulation is essential. Here's how the motor with a fan blade typically works: 1. Motor: The motor is an electric device that converts electrical energy into mechanical energy. In this context, it's usually an electric motor designed to rotate the fan blade. The motor can be of different types, such as AC (alternating current) or DC (direct current), depending on the application. 2. Fan Blade: The fan blade is a component with curved or angled surfaces that are designed to move air when rotated. The blade is connected to the shaft of the motor, so when the motor spins, it also drives the fan blade to rotate. 3. Housing: The motor and fan blade assembly is usually housed in a protective casing or housing. The housing provides structural support, protection, and helps guide the airflow generated by the rotating fan blade. Applications of motors with fan blades include: 1. Cooling Fans: These are commonly found in electronic devices, computers, laptops, and other equipment to dissipate heat and prevent overheating. 2. HVAC Systems: Heating, Ventilation, and Air Conditioning systems use motors with fan blades to circulate air and maintain indoor comfort. 3. Household Fans: Ceiling fans, pedestal fans, table fans, and other types of fans in households use this configuration for air circulation. 4. Automotive Cooling Fans: In vehicles, motors with fan blades are used in cooling fans for the engine and air conditioning system. 5. Industrial Fans: Large industrial fans used for ventilation, air circulation, and cooling purposes also use this setup. The motor with a fan blade is a practical and efficient way to move air and provide cooling in various applications. The size and power of the motor, as well as the design of the fan blade, are tailored to the specific requirements of the device or system in which it is used.

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS 500 g Ferric Chloride (FeCl3) PCB Etching Powder For PCB Making

By TECHDELIVERS

₹282   ₹559

You save ₹277!

49.55% OFF

The TECHDELIVERS Ferric Chloride (FeCl3) PCB Etching Powder For PCB Making - 500 g, also known as etchant or etching solution, is a chemical substance used in the process of creating printed circuit boards (PCBs). PCB etching is a method of removing unwanted copper from the surface of a copper-clad PCB substrate to create circuit traces, pads, and other conductive features. PCB Etching Powder: Chemical Composition: PCB etching powder typically consists of a mixture of chemicals that can dissolve or react with copper, effectively etching away the unwanted copper from the substrate. Selective Etching: The etchant selectively removes copper while leaving behind the protective mask that defines the circuit pattern. This allows for precise creation of conductive pathways on the PCB. Etching Process: The PCB is coated with a resist material (such as photoresist) that protects the areas where the circuit traces and pads are intended. The PCB is then submerged or brushed with the etching solution. The etchant removes copper from the exposed areas, leaving the desired circuit pattern. Safety Considerations: PCB etching solutions can contain corrosive and potentially harmful chemicals. Proper safety precautions, such as wearing protective gear and working in a well-ventilated area, are essential when using etchants. Common Types of PCB Etching Solutions: Ferric Chloride (FeCl3): One of the most common etchants, ferric chloride is corrosive and reacts with copper to dissolve it. Cupric Chloride (CuCl2): Cupric chloride is used as an alternative to ferric chloride and offers faster etching times. Ammonium Persulfate (NH4)2S2O8): This etchant is less corrosive compared to ferric chloride and is often used for more delicate applications. Sodium Persulfate (Na2S2O8): Similar to ammonium persulfate, sodium persulfate is a milder etchant suitable for fine-pitch traces and sensitive components. Using PCB Etching Powder: Prepare the PCB: Apply a resist material (photoresist, for example) to the PCB surface. The resist protects the areas you want to keep. Expose the Circuit Pattern: Expose the resist to light or use other methods to create the desired circuit pattern. Develop the Resist: Develop the exposed resist to remove unwanted portions, leaving the circuit pattern intact. Etching: Submerge the PCB in the etching solution. Agitate or brush the solution over the surface to speed up the process. Rinse and Neutralize: Once the desired copper has been etched away, rinse the PCB thoroughly with water to remove any remaining etchant. Neutralize the etchant to make it safe for disposal. Remove the Resist: Strip the remaining resist material from the PCB using appropriate methods.

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS EPK Heat Toner Transfer Paper Project Circuit PCB, Making at Home Set of 10 Pcs x A4 Size, 0624XOJ5C6W

By TECHDELIVERS

Pack of 10 piece

₹176   ₹299

You save ₹123!

41.14% OFF

The TECHDELIVERS EPK Heat Toner Transfer Paper Project Circuit PCB, Making at Home Set of 10 Pcs x A4 Size . Transfer paper is commonly used in the process of making DIY PCBs at home. The transfer paper method allows you to transfer the circuit design from a printed image onto a copper-clad PCB board, which is then etched to create the desired PCB circuit. Here's a step-by-step guide to the transfer paper method for creating a PCB: Materials Needed:
1. Copper-clad PCB board
2. Circuit design printed on regular paper using a laser printer (mirrored/flipped horizontally)
3. Transfer paper (also known as iron-on transfer paper or toner transfer paper)
4. Iron
5. Etching solution (such as ferric chloride or ammonium persulfate)
6. Plastic container for etching
7. Rubber gloves
8. Fine sandpaper or abrasive pad
9. Safety goggles Steps: 1. Circuit Design: Create or download the desired circuit design using PCB design software. Print the circuit design on regular paper using a laser printer. The design should be mirrored or flipped horizontally, as it will be transferred to the copper side of the PCB. 2. Preparing the Copper Board: Cut the copper-clad PCB board to the desired size for your circuit. Clean the copper surface thoroughly with fine sandpaper or an abrasive pad to remove any oxidation or impurities. 3. Preparing the Transfer Paper: Cut the transfer paper to the size of the PCB board. Place the printed side of the transfer paper (with the circuit design) onto the cleaned copper surface. Ensure that the toner side is in contact with the copper surface. 4. Heat Transfer: Preheat the iron to a medium-high setting (without steam). Place the iron on top of the transfer paper and apply even pressure while moving the iron in a circular motion. Make sure to cover the entire circuit design area. Apply heat for about 2-3 minutes. 5. Cooling and Peeling: Allow the transfer paper to cool down for a few minutes. Once cool, gently peel off the transfer paper. The toner from the paper should now be transferred onto the copper surface. 6. Etching: Wear rubber gloves and safety goggles for this step. Prepare the etching solution in a plastic container according to the manufacturer's instructions. Submerge the copper-clad board with the toner in the etching solution. Agitate the container gently to ensure even etching. The etching process will remove the exposed copper areas, leaving the printed circuit behind.

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS PCB Toner Transfer Paper, Glossy Paper Size A4

By TECHDELIVERS

Pack of 50 piece

₹176 - ₹1,769

You save ₹205!

29.33% OFF

TECHDELIVERS PCB Toner Transfer Paper in Glossy A4 size is a specialized printing medium designed for creating high-quality printed circuit board (PCB) layouts with ease and precision. This paper is specifically engineered for use in the toner transfer method, a popular technique used by electronics enthusiasts and professionals for transferring circuit designs onto copper-clad boards.The glossy finish of the paper ensures crisp and clear printing of PCB designs, allowing for intricate details and fine traces to be accurately reproduced. The A4 size is a standard dimension that provides ample space for printing multiple circuit designs on a single sheet, maximizing efficiency and reducing waste during the PCB fabrication process.One of the key advantages of TECHDELIVERS PCB Toner Transfer Paper is its compatibility with laser printers and copiers commonly found in home offices and professional work environments. This compatibility ensures that users can easily print their circuit designs directly onto the transfer paper without the need for specialized printing equipment.The paper's heat-resistant properties are crucial for the toner transfer method, where the printed circuit design is transferred from the paper onto a copper-clad board using heat and pressure. TECHDELIVERS PCB Toner Transfer Paper can withstand the high temperatures required for successful toner transfer, ensuring reliable and consistent results.Moreover, the glossy surface of the paper facilitates smooth toner transfer onto the copper surface of the PCB, minimizing the risk of smudging or smearing during the transfer process. This contributes to the overall quality and accuracy of the transferred circuit pattern, making it easier for users to etch and create functional PCBs.Overall, TECHDELIVERS PCB Toner Transfer Paper in Glossy A4 size is a reliable and efficient solution for creating professional-grade PCB layouts using the toner transfer method. Its compatibility with laser printers, heat-resistant properties, and glossy finish make it an essential tool for electronics enthusiasts, hobbyists, and professionals involved in PCB prototyping and fabrication.

Type of Product : PCB toner transfer paper

Sheet Size : A4

Paper Finish : Glossy

Explore other Variants (9)

Ships within 24 hrs

TECHDELIVERS RS555 DC Hobby Motor Turbine Generator 12 V 5500 RPM High Torque, 1118V43ZQ34

By TECHDELIVERS

₹235   ₹499

You save ₹264!

52.91% OFF

The TECHDELIVERS RS555 DC Hobby Motor Turbine Generator 12 V 5500 RPM High Torque is a system that combines three main components: a motor, a turbine, and a generator. This setup allows for the conversion of mechanical energy into electrical energy. The process involves using the motor to drive the turbine, which, in turn, rotates the generator to produce electricity. Here's how each component works in the motor turbine generator system: 1. Motor: The motor is an electric device that converts electrical energy into mechanical energy. It provides the initial rotational force required to drive the turbine. 2. Turbine: The turbine is a machine with blades or buckets that rotate when subjected to a fluid (gas or liquid) flow. In the context of a motor turbine generator, the turbine is connected to the motor's shaft and rotates when the motor is powered on. 3. Generator: The generator is an electrical device that converts mechanical energy (rotational motion) into electrical energy (electricity). As the turbine rotates, it drives the generator, causing the generation of electricity through electromagnetic induction. The motor turbine generator system is commonly used in various applications, such as: 1. Power Plants: In some power plants, particularly in hydroelectric power plants, water turbines are driven by electric motors to generate electricity. 2. Wind Turbines: In wind power systems, the motor is used to initiate the rotation of the turbine, which harnesses the kinetic energy of the wind and drives the generator to produce electrical power. 3. Gas Turbines: In some gas turbine power plants, electric motors are used to start the initial rotation of the gas turbine before it begins generating power on its own. 4. Experimental Setups: Motor turbine generator systems are also used in educational and experimental setups to demonstrate the principles of energy conversion and electrical generation. It's important to note that in many cases, the motor turbine generator system may be a part of a larger complex power generation system. The choice of the motor, turbine, and generator components depends on the specific application, power requirements, and efficiency considerations.

Add to Cart Buy Now

Ships within 24 hrs

TECHDELIVERS 500 g Ferric Chloride FeCl3 PCB Etching Agent for DIY PCB Making, 1013UZ7UGG0

By TECHDELIVERS

Bottle of 500 gram

₹282   ₹499

You save ₹217!

43.49% OFF

The TECHDELIVERS 500 g Ferric Chloride FeCl3 PCB Etching Agent for DIY PCB Making, a chemical sorcerer in the world of electronics, emerges as a transformative solution that shapes the pathways of innovation. This unassuming concoction wields the power to carve intricate designs onto copper-clad circuit boards, giving birth to the intricate patterns that underlie modern technology. Designed with precision and reactivity, a PCB etching agent performs a delicate dance of chemical reactions. It selectively removes unwanted copper from the surface of a circuit board, leaving behind the pathways that guide electrical currents. It's a conductor of transformation, turning raw copper into meticulously designed circuitry. In the realm of circuit board production, a PCB etching agent is the master of detail, bringing complex designs to life. It transforms flat sheets of copper into functional works of art, connecting components and enabling the flow of information and power that powers our devices. With an eye for precision, a PCB designer employs the etching agent to create connections that dictate the functionality of a circuit. It's a tool that breathes life into the dreams of engineers, artists, and innovators, allowing their visions to materialize as tangible pathways of possibility. Beyond its functional prowess, a PCB etching agent stands as a symbol of controlled creativity. It's the fusion of chemistry and technology, where the controlled application of science yields results that spark progress. In its transformative power, it embodies the essence of design, intricacy, and the ever-evolving journey of human ingenuity. In the realm of innovation, a PCB etching agent is the silent collaborator that forges the connections that drive our digital lives. It's the alchemical blend that turns copper into circuits and circuits into devices, leaving an indelible mark on the tapestry of technology.

Add to Cart Buy Now

Ships within 5 days

Invento F450 Quadcopter DIY Kit - F450 Frame + 2200KV BLDC + 30A ESC + 1045 Propellor ISC 830

By Invento

Pack of 1 piece

₹7,079   ₹12,980

You save ₹5,901!

45.46% OFF

Add to Cart Buy Now

Ships within 5 days

Invento 260mA Mini DC Air Pump ISC 1613

By Invento

Pack of 2 piece

₹388 - ₹518

You save ₹202!

34.24% OFF

The Invento 260mA Mini DC Air Pump ISC 1613 is a compact and efficient air pump designed for a variety of applications where space and power constraints are a concern. With a nominal current of 260mA and operating on a DC power supply, this mini air pump provides reliable and consistent air flow in a small, portable package. It is ideal for use in aquariums, small ventilation systems, and other low-power air movement needs. The ISC 1613 features a robust construction that ensures durability and long-term performance. Its compact design makes it suitable for installation in tight spaces where traditional pumps might be too large. Despite its size, the pump delivers a commendable air flow rate, making it a versatile choice for both hobbyist and professional applications. The air pump operates quietly, minimizing noise disruption while providing efficient air circulation. It is easy to install and maintain, with user-friendly connections and minimal maintenance requirements. The device is engineered to handle continuous operation, making it reliable for ongoing use in various environments. The Invento Mini DC Air Pump ISC 1613 is a practical solution for applications requiring a small yet powerful air pump. Its combination of efficiency, durability, and compact size makes it an excellent choice for enhancing air flow in confined spaces and specialized settings.

Flow Rate : 0.3L/min

Voltage : 3V - 6V DC

Type of Product : Mini DC Air Pump

Current : 260mA

Size : 48 x 27 x 12 mm

Pressure : 30KPa

No-Load Testing Paramete : 3v 130ma, 300mmhg

Explore other Variants (3)

Ships within 3 days

EASY ELECTRONICS Development Board Ultra-Low Power Consumption Dual Core For ESP-32, ESP-32S

By EASY ELECTRONICS

₹754   ₹999

You save ₹245!

24.52% OFF

The Easy Electronics ESP-32 Development Board, a powerful and versatile platform for your IoT projects. This development board is based on the ESP-32 microcontroller, which offers dual-core processing, ultra-low power consumption, and built-in Wi-Fi and Bluetooth connectivity. The Easy Electronics ESP-32 Development Board is designed to provide seamless integration and exceptional performance. The dual-core processor allows for parallel execution of tasks, enabling efficient multitasking and faster response times. This makes it ideal for applications that require real-time data processing and complex computations. One of the key features of the ESP-32 microcontroller is its ultra-low power consumption. It is designed to operate in low-power modes, making it suitable for battery-powered applications and energy-efficient projects. With its advanced power management features, you can optimize the power consumption of your devices and extend the battery life. The development board is equipped with onboard Wi-Fi and Bluetooth modules, allowing for easy connectivity to the internet and other devices. You can effortlessly connect to wireless networks, send and receive data, and communicate with other devices using the built-in protocols. This opens up a world of possibilities for creating IoT applications, home automation systems, and wireless sensor networks. The Easy Electronics ESP-32 Development Board provides an array of input and output options, including digital I/O pins, analog inputs, PWM outputs, and more. This allows for seamless integration with a wide range of sensors, actuators, and peripheral devices. Whether you're measuring environmental parameters, controlling motors, or interfacing with displays, this development board offers the flexibility you need. Programming the ESP-32 Development Board is straightforward, thanks to its compatibility with the Arduino development environment. You can easily write code using familiar Arduino syntax and leverage the extensive library support available. Additionally, the development board features a USB interface for easy programming and debugging.

Add to Cart Buy Now

Ships within 3 days

Hobbywing XRotor-40A ESC Drone Speed Controller

By Hobbywing

₹3,421  

Hobbywing XRotor-40A ESC is a great item that is made by Hobbywing. The UAV battery is the ideal power solution for all of your applications where performance, endurance, and reliability are critical.Hobbywing XRotor-40A ESC is a popular ESC for the price, but it has some downsides that might make other models better for your needs. It works well for small to medium sized cars, and is capable of handling up to a 2S battery. The throttle curves are available in four different options, but you can only change them with the solderless method.Hobbywing XRotor-40A ESC is the first and only 30A 2-6S BLHeli_S ESC in the market. It's a feature packed, micro sized, light weight, high performance speed controller especially designed for multi-rotor racing drones.The Hobbywing XRotor-40A is based on the latest BLHeli_S firmware (1.16) and uses hardware generated PWM for smooth throttle response. It has DSHOT1200 built in for fast response to fast throttle input signal. The hardware generated PWM signals are also used to increase motor life span and reduce heat buildup. The Hobbywing XRotor-40A ESC comes with a current sensor (0~3.3A) sensor rated at IPEX connector. The high performance MCU of the Hobbywing XRotor-40A can handle all types of flight controllers and it also supports Telemetry which is a must have for racing drone applications.

Add to Cart Buy Now

Ships within 3 days

Invento 2 mm Hole Dia Aluminium Alloy Sheet for DIY Project

By Invento

₹884 - ₹1,887

You save ₹1,417!

42.89% OFF

The Invento 2 mm Hole Diameter Aluminium Alloy Sheet is an essential material for a wide range of DIY projects, offering both durability and versatility. Crafted from high-quality aluminium alloy, this sheet is designed to meet the needs of hobbyists and professionals alike, making it ideal for custom fabrication, crafting, and repair work. With a precise 2 mm hole diameter, the sheet features a series of evenly spaced perforations that enhance its adaptability for various applications. The perforations allow for easy integration with other components, facilitating seamless assembly in projects such as custom enclosures, decorative panels, and ventilation grilles. The aluminium alloy construction provides a strong yet lightweight material, ensuring that the sheet maintains its structural integrity while remaining manageable and easy to work with. The sheet's aluminium alloy composition also offers excellent resistance to corrosion, making it suitable for use in both indoor and outdoor environments. Its smooth surface can be easily painted, anodized, or finished to match aesthetic preferences or functional requirements. Additionally, the material's inherent thermal and electrical conductivity makes it a practical choice for projects involving heat dissipation or electrical components. Whether you're constructing a bespoke piece of furniture, creating custom artwork, or building functional components, the Invento Aluminium Alloy Sheet delivers the quality and performance needed to achieve professional results. Its combination of strength, versatility, and ease of use makes it a valuable addition to any DIY enthusiast's toolkit.

Suitable For : DIY Projects

Type of Product : Aluminium Alloy Sheet

Hole Diameter : 2mm

Material : Aluminium Alloy

Package Contains : 1 pc Aluminium Alloy Sheet

Explore other Variants (2)

Ships within 3 days

Invento ISC 651-2 1.5 LPMAir Vacuum Piston Pump for DIY Projects

By Invento

Pack of 4 piece

₹3,421   ₹6,372

You save ₹2,951!

46.31% OFF

Add to Cart Buy Now

Ships within 3 days

Hobbywing Xrotor 20A ESC Drone Speed Controller for UAV

By Hobbywing

₹2,005  

The Hobbywing Xrotor 20A ESC is an affordable, reliable and easy to use electronic speed controller that is perfect for your multi-rotor applications. The Xrotor ESC is small yet powerful, and can handle 2S-4S LiPo batteries without any problems. The Xrotor has a built-in BEC that provides 5V to power the receiver and servos, so there's no need for additional components or wiring for them.The Xrotor 20A ESC is also very easy to program. You can set the desired battery voltage and the number of cells you are using (2S-4S) using dip switches, which means you don't have to go through the hassle of hooking up a computer to reprogram it every time you want to change your battery configuration. The Xrotor ESC also comes with an LED display that shows you the battery voltage under load, so you can keep track of your battery health.The Xrotor 20A ESC can handle up to 3S LiPo/LiFe batteries, and comes with a barrel jack connector for an external BEC. The input voltage range is 6 – 15V, which means it can be powered by 2-3s LiPo, a 3s LiFe battery, or even 4s LiPo with a step down converter.For most applications, an external BEC is not necessary. If you want to use an external BEC though, Hobbywing offers an optional one on their site. The stock BEC will do just fine for powering servos.As far as programming goes, this ESC has all of the features you'd expect from a modern speed controller. There are three timing modes: Multiwii/Airplane mode (1-2ms), Multiwii/Heli mode (2-4ms), and Multiwii/Climb mode (2-7ms). It also has two programmable mixes: one between throttle and pitch channel.

Add to Cart Buy Now

Ships within 6 days

Invento EN31 Rustproof Steel Smooth 5 mm Rod ISC 1931-C (Pack of 10)

By Invento

Pack of 10 piece

₹943 - ₹1,769

The "Invento 10pcs EN31 Rustproof Steel Smooth Rod 5 mm Length 100-200 mm" is a package containing 10 smooth rods made from EN31 rustproof steel, each with a diameter of 5mm and a length ranging from 100mm to 200mm. Here's a detailed overview:
Material: The rods are manufactured from EN31 rustproof steel. EN31 steel is well-known for its high strength, hardness, and resistance to corrosion, making it suitable for applications where durability and longevity are crucial, especially in environments prone to rust and corrosion.
Smooth Rods: These rods feature a smooth surface finish without any threading or grooves. Smooth rods are commonly utilized in applications requiring linear motion, such as in 3D printers, CNC machines, robotics, and other mechanical systems. They are often paired with linear bearings or bushings to enable smooth and precise movement.
Quantity: The package includes 10 smooth rods, providing a convenient solution for projects that necessitate multiple rods or for keeping spare parts on hand.
Diameter: Each rod has a diameter of 5mm, which is a standard size for smooth rods used in various applications.
Length Range: The length of each rod ranges from 100mm to 200mm, offering flexibility to accommodate different project requirements. This range allows users to select the appropriate rod length based on their specific needs.

Type of Product : Parts & Accessories

Material : EN-31 (Hard Chromed)

Explore other Variants (3)

Ships within 6 days

Invento 12V Diaphragm Self-Priming Water DC Pump Micro For DIY Projects ISC 1917

By Invento

₹601 - ₹1,415

The Invento 12V Diaphragm Self-Priming Water DC Pump ISC 1917 is a compact, versatile pump designed for DIY enthusiasts and small-scale projects. Featuring a robust diaphragm mechanism, this pump is capable of self-priming, meaning it can start pumping water even if it has not been fully primed beforehand. This function is particularly useful for applications where consistent water flow is needed, and it simplifies the setup process for users. Operating on a 12V DC power supply, the ISC 1917 is highly efficient, making it suitable for use in a variety of low-power settings. Its small size and lightweight design allow for easy installation in tight spaces, whether it's in a small water feature, a compact irrigation system, or a custom-built project. The pump's self-priming capability ensures reliable performance, even when the water source is located at a distance or when the system is first set up. The diaphragm construction not only enhances the pump’s durability but also ensures it runs quietly and smoothly, minimizing noise and vibration during operation. The Invento ISC 1917 is built with high-quality materials to resist wear and tear, making it a dependable choice for continuous or intermittent use. Ideal for hobbyists and engineers alike, this micro pump is perfect for projects that require a steady, reliable water supply without the need for extensive plumbing or complicated setups. Its efficiency, ease of use, and durability make it an excellent addition to any DIY toolkit.

Nozzle Diameter : 7.5mm

Flow Rate : 80-120L/H

Voltage : 12V

Type of Product : Diaphragm Self-Priming Water DC Pump Micro

Maximum lift : 40-120cm

Pump Diameter : 35mm

Pump Length : 80 mm

Maximum suction : 2 metre

Explore other Variants (4)

Ships within 6 days

Invento F450 Quadcopter DIY Kit - F450 Frame + 1800KV BLDC + 30A ESC + 1045 Propellor ISC 829

By Invento

Pack of 1 piece

₹6,607   ₹12,980

You save ₹6,373!

49.1% OFF

Add to Cart Buy Now

Ships within 6 days

Invento 9.6 W Solenoid Electric Lock ISC 1624

By Invento

₹1,415  

Add to Cart Buy Now

Ships within 6 days

Invento Trapezoidal Lead Screw T8 8mm Pitch 2mm Lead 8 TR8

By Invento

Pack of 1 piece

₹2,831 - ₹3,421

The Invento 300mm Trapezoidal Lead Screw. Featuring a T8 trapezoidal thread profile, 8mm pitch, and 2mm lead, this lead screw provides smooth and precise linear motion in your projects. Whether you're building CNC machines, 3D printers, or automation systems, this lead screw ensures accurate positioning and reliable performance. With its durable construction and precise machining, it's perfect for demanding applications in manufacturing, prototyping, and robotics.

Type of Product : Parts & Accessories

Explore other Variants (4)

Ships within 6 days

Invento F450 Quadcopter DIY Kit - F450 Frame + 1400KV BLDC + 30A ESC + 1045 Propellor ISC 828

By Invento

Pack of 1 piece

₹6,607   ₹12,980

You save ₹6,373!

49.1% OFF

Add to Cart Buy Now

Ships within 6 days

Invento 60 - 100 W Aluminium Peltier Water Cooling Block ISC 1638-1B

By Invento

₹1,651  

Add to Cart Buy Now

Ships within 6 days

Invento ISC 232 9mm Noise Suppressor Emi Rfi Clip Choke Ferrite Core Cable Filter Black JG

By Invento

₹530  

Add to Cart Buy Now

Ships within 6 days

Invento DJI Naza-M V2 MultiRotor Flight Stabilization Controller with GPS Set ISC 934

By Invento

Pack of 1 piece

₹35,399   ₹47,200

You save ₹11,801!

25% OFF

Add to Cart Buy Now

Ships within 6 days

Invento F450 Quadcopter DIY Kit - F450 Frame + 1000KV BLDC + 30A ESC + 1045 Propellor ISC 827

By Invento

Pack of 1 piece

₹6,253   ₹12,980

You save ₹6,727!

51.83% OFF

Add to Cart Buy Now

Ships within 6 days

Invento 60 - 100 W Aluminium Peltier Water Cooling Block ISC 1638-1

By Invento

₹1,769  

Add to Cart Buy Now

Ships within 6 days

Invento F450 Quadcopter DIY Kit APM2.8 + Quad Frame + 1000KV BLDC + 30A ESC + 1045 Prop ISC 880

By Invento

Pack of 1 piece

₹10,737   ₹21,240

You save ₹10,503!

49.45% OFF

Add to Cart Buy Now

Ships within 6 days

Invento Smooth Nylon Rod 10 mm Outer Diameter 1000 mm (1 m) Length Natural White, ISC 2089-2E (Pack of 10 Pcs)

By Invento

Pack of 10 piece

₹1,769   ₹2,600

You save ₹831!

31.95% OFF

The Invento Smooth Nylon Rod 10 mm Outer Diameter 1000 mm (1 m) Length Natural White, ISC 2089-2E (Pack of 10 Pcs) is a precision-engineered component designed for robotics, prototyping, and mechanical assemblies. Manufactured from high-grade nylon, it offers excellent strength, flexibility, and resistance to wear, making it suitable for long-term use in moving and structural parts. Its smooth surface finish ensures low friction, enabling seamless motion in shafts, guides, and support systems. The natural white color provides a clean, professional appearance, ideal for educational kits and industrial projects alike. Engineered for versatility, the Invento Smooth Nylon Rod 10 mm Outer Diameter 1000 mm (1 m) Length Natural White, ISC 2089-2E (Pack of 10 Pcs) is easy to cut, drill, and customize according to project requirements. It supports precise fabrication in DIY robotics, automation models, and experimental setups. Lightweight yet durable, this rod enhances design efficiency, improves mechanical stability, and delivers dependable performance for students, hobbyists, and professional developers.

Add to Cart Buy Now

Ships within 6 days

Invento 2 Kg Load Capacity Plastic Robotic Wheel Durable Rubber Black Tire Wheel (Pack of 2)

By Invento

Pack of 2 piece

₹400 - ₹801

The Invento 2 Kg Load Capacity Plastic Robotic Wheel is an essential component for robotics enthusiasts and engineers seeking reliable and durable wheels for their projects. Each wheel in this pack of two features a robust plastic construction that ensures a sturdy and long-lasting performance. Designed to support a load capacity of up to 2 kilograms per wheel, these wheels are ideal for lightweight robotic platforms and other mobile applications. The wheels are equipped with durable black rubber tires, providing excellent traction and stability on various surfaces. The rubber tires offer a non-slip grip, ensuring smooth and controlled movement even on uneven or slippery terrain. This makes them suitable for both indoor and outdoor use, enhancing the versatility of your robotic designs. With a focus on durability and reliability, the Invento robotic wheels are engineered to withstand repeated use and rough handling. The plastic material is resistant to wear and tear, ensuring that the wheels maintain their performance over time. Additionally, the wheels are easy to install and integrate into your robotic systems, making them a practical choice for DIY projects and professional applications alike. Whether you are building a robotic vehicle, a remote-controlled car, or a custom automation system, the Invento 2 Kg Load Capacity Plastic Robotic Wheel offers the quality and functionality you need. This pack of two wheels provides a cost-effective solution for enhancing the mobility and performance of your robotic creations.

Type of Product : Parts & Accessories

Material : ABS Plastic & Rubber

Loading Capacity : 2 Kg

Hole Size : 6 mm

Pack of : 2

Name of Manufacturer/Packer/Importer : Invento India Ltd.

Explore other Variants (6)

Ships within 6 days

Invento 95mm x 20mm Plastic Robotic Wheel Durable Rubber Black Tire Wheel

By Invento

Pack of 4 piece

₹695  

Add to Cart Buy Now

Ships within 6 days

Invento 260x130x45 mm Chassis Sheet 4 Wheel Car Kit Metal (0.65 mm Thickness, 70 mm Wheel Diameter)

By Invento

Pack of 1 kit

₹2,123 - ₹2,241

The Invento 260x130x45 mm Chassis Sheet 4 Wheel Car Kit is a versatile and robust metal frame designed for hobbyists and DIY enthusiasts in the world of model cars. This kit features a precision-engineered chassis made from high-quality metal with a thickness of 0.65 mm, ensuring durability and resilience under various conditions. The chassis measures 260x130x45 mm, providing ample space for assembling components while maintaining a compact and manageable size. The kit includes four wheels with a diameter of 70 mm, crafted to support smooth and stable movement of the car. These wheels are designed to fit perfectly with the chassis, allowing for an efficient and reliable driving experience. The metal chassis not only offers strength and stability but also a sleek, professional appearance that enhances the overall aesthetic of the model car. Ideal for creating custom vehicles or modifying existing ones, this chassis kit provides a solid foundation for incorporating various components such as motors, batteries, and steering mechanisms. Its versatile design makes it suitable for a wide range of applications, from educational projects to competitive racing models. Overall, the Invento Chassis Sheet 4 Wheel Car Kit is an excellent choice for those seeking a high-quality, durable, and adaptable platform for their model car building endeavors. Its combination of strength, precision, and ease of use ensures a rewarding experience for both novice and experienced builders alike.

Voltage : 6-12 V

Type of Product : Parts & Accessories

Sheet Thickness : 0.65 mm

Chassis Material : Steel (Powder Coated)

Chasis Dimension : 260x130x45mm

Shaft Diameter : 6 mm

Wheel Diameter : 70

Torque Range : 5 Kg-cm

Explore other Variants (18)

Ships within 7 days

Invento 20dBm Radio Telemetry Kit ISC 184-X

By Invento

₹4,601   ₹6,088

You save ₹1,487!

24.42% OFF

Add to Cart Buy Now

Ships within 6 days

Invento 1.5 mm Pitch Threaded Rod with Nut ISC 1964

By Invento

₹530 - ₹1,297

The "Invento Threaded Rod Length 100 - 1000 mm with Nut" seems like a product designed for various applications where threaded rods are required. Here's a breakdown of what such a product might entail:
Threaded Rod: The core component is the threaded rod itself. This rod would likely be made of metal, commonly steel or stainless steel, though it could also be made from other materials like brass or aluminum depending on the application's requirements. The rod would have a uniform threading along its length to allow for the attachment of nuts, bolts, or other fasteners.
Length Range: The threaded rod would have a length range from 100mm to 1000mm, meaning it can be cut or adjusted to various lengths within this range to suit different needs. This flexibility allows for versatility in applications where specific lengths are required.
Nut: The product includes a nut that fits the threading of the rod. The nut would likely be made from the same material as the rod and would be compatible with the threading pitch to ensure a secure fit.
Usage: Threaded rods with nuts have a wide range of applications across industries including construction, manufacturing, automotive, plumbing, and DIY projects. They are commonly used for joining or fastening materials together, providing structural support, or creating adjustable components.
Packaging: Depending on the manufacturer, these products might be sold individually or in packs. Proper packaging ensures that the rods and nuts are protected during transport and storage.

Type of Product : Parts & Accessories

Material : SS 304

Pitch : 1.5mm

Nut Material : Brass

Thread Type : M10 Metric Thread

Nut Outside Dia : 32 mm

Explore other Variants (2)

Ships within 6 days

Invento 3V - 12V DC Submersible Pump Horizontal Micro For DIY Projects ISC 1048

By Invento

Pack of 2 piece

₹400 - ₹695

The Invento 3V - 12V DC Submersible Pump Horizontal Micro ISC 1048 is a versatile and efficient solution designed for a variety of DIY projects. This compact and lightweight pump is capable of operating within a voltage range of 3 to 12 volts DC, making it adaptable for numerous applications. It features a horizontal design, which is ideal for situations where vertical space is limited. The ISC 1048 model is built with high-quality materials, ensuring durability and longevity. Its submersible nature allows it to function efficiently underwater, providing a steady and reliable flow rate. The pump is suitable for small-scale water circulation tasks, such as in aquariums, hydroponic systems, and small fountains. Additionally, its low power consumption makes it an energy-efficient choice for continuous operation. This micro pump is easy to install and maintain, making it an excellent choice for hobbyists and DIY enthusiasts. It operates quietly, minimizing noise disruption in various environments. The Invento 3V - 12V DC Submersible Pump also includes safety features to prevent overheating and ensure safe operation. With its versatile voltage range and reliable performance, the Invento ISC 1048 is a valuable component for projects requiring efficient water movement. Whether used for educational purposes, creative DIY setups, or practical applications, this submersible pump delivers consistent results, combining functionality with ease of use.

Suitable For : For DIY Projects

Flow Rate : 80-120L/H

Voltage : 3V - 12V

Type of Product : DC Submersible Pump Horizontal Micro

Category : Parts & Accessories

Maximum lift : 40-110cm

Explore other Variants (3)

Ships within 6 days

Invento 150 - 180 W Aluminium Peltier Water Cooling Block ISC 1638-3A

By Invento

₹2,123  

Material: Aluminium; Size is 40x40x12mm Model: 12715, Peltier Voltage: 12V DC; Wattage: 150 - 180 Watts Pipe - Inner Diameter: 7mm; Outer Diameter: 9mm; Length: 1 meter Suitable for Peltier Cooling, cooling graphics GPU, motherboard Northbridge Southbridge CPU, graphics; semiconductor cooling piece, industrial cooling, etc Package Include 1 x Aluminium Cooling Block, 1 x 12715 Peltier, 1 x one meter pipe

Add to Cart Buy Now

Ships within 6 days

Invento 2 Kg Loading Capacity Plastic Robotic Wheel

By Invento

Pack of 1 piece

₹400 - ₹695

The Invento 2 Kg Loading Capacity Plastic Robotic Wheel is a versatile and durable component designed for use in various robotic applications. Engineered to support a maximum load of 2 kg, this wheel provides reliable performance and stability for small to medium-sized robots. Its plastic construction offers a lightweight yet robust solution, ideal for robots requiring efficient mobility without compromising on strength. The wheel features a high-quality plastic material that ensures longevity and resistance to wear and tear. Its design incorporates a smooth, treaded surface that enhances traction and provides a steady grip on various surfaces, improving the overall maneuverability of the robot. This makes it suitable for indoor environments and controlled surfaces where precise movement is crucial. The Invento robotic wheel is engineered with ease of integration in mind. It comes with a standard mounting pattern, making it compatible with a wide range of robotic chassis and frameworks. This user-friendly design allows for straightforward installation and adjustment, facilitating quick setup and maintenance. Additionally, the wheel’s construction includes features that reduce noise and vibration, contributing to a quieter and smoother operational experience. Whether used in educational robots, hobbyist projects, or prototype development, the Invento 2 Kg Loading Capacity Plastic Robotic Wheel delivers dependable performance and enhances the functionality of robotic systems. Its combination of lightweight design, durability, and ease of use makes it an excellent choice for a variety of robotic applications.

Type of Product : Robotic Wheel

Loading Capacity : 2 Kg

Outside Diameter : 95 mm

Hole Size : 6 mm

Explore other Variants (2)

Ships within 6 days

Invento EN31 Rustproof Steel Smooth 6 mm Rod ISC 1932-C (Pack of 10)

By Invento

Pack of 10 piece

₹1,132 - ₹1,887

The "Invento 10pcs EN31 Rustproof Steel Smooth Rod 6 mm Length 100-200 mm" is a package containing 10 smooth rods made from EN31 rustproof steel, each with a diameter of 6mm and a length ranging from 100mm to 200mm. Here's a detailed overview:
Material: The rods are crafted from EN31 rustproof steel, known for its high strength, hardness, and resistance to corrosion. This material choice ensures durability and longevity, especially in environments prone to rust and corrosion.
Smooth Rods: These rods feature a smooth surface finish without any threading or grooves. Smooth rods are commonly used in applications requiring linear motion, such as in 3D printers, CNC machines, robotics, and other mechanical systems. They are often paired with linear bearings or bushings to enable smooth and precise movement.
Quantity: The package contains 10 smooth rods, providing a convenient solution for projects requiring multiple rods or for keeping spare parts on hand.
Diameter: Each rod has a diameter of 6mm, which is a standard size for smooth rods used in various applications.
Length Range: The length of each rod ranges from 100mm to 200mm, offering flexibility to accommodate different project requirements. This range allows users to select the appropriate rod length based on their specific needs.

Type of Product : Parts & Accessories

Material : EN-31 (Hard Chromed)

Explore other Variants (3)

Ships within 6 days

Invento EN31 Rustproof Steel Smooth 4 mm Rod ISC 1930-C (Pack of 10)

By Invento

Pack of 10 piece

₹931 - ₹1,297

The "Invento 10pcs EN31 Rustproof Steel Smooth Rod 4 mm Length 100-200 mm" is a package containing 10 smooth rods made from EN31 rustproof steel, each with a diameter of 4mm and a length ranging from 100mm to 200mm. Here's an overview of this product:
Material: The rods are made from EN31 rustproof steel. EN31 steel is known for its high strength, hardness, and resistance to corrosion, making it suitable for various applications requiring durability and longevity, especially in environments prone to rust and corrosion.
Smooth Rods: These rods feature a smooth surface finish without any threading or grooves. Smooth rods are commonly used in applications where linear motion is required, such as in 3D printers, CNC machines, robotics, and other mechanical systems. They are often used in conjunction with linear bearings or bushings to facilitate smooth and precise movement.
Quantity: The package contains 10 smooth rods, providing a convenient solution for projects that require multiple rods or for stocking up on spare parts.
Diameter: Each rod has a diameter of 4mm, which is a common size for smooth rods used in various applications.
Length Range: The rods' length ranges from 100mm to 200mm, offering flexibility to suit different project requirements. This range allows users to choose the appropriate rod length based on their specific needs.

Type of Product : Parts & Accessories

Material : EN-31 (Hard Chromed)

Explore other Variants (3)

Previous Next

Page 1 of 16 results