• Home /
• All Brands /
• U-Tech /
• Lab Supplies

Have a question? Call us now at +91 9650660070

U-Tech Lab Supplies

Showing 40 out of 311 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 3 days

U-Tech Control Box With Humidistat for 5L Stainless Steel Humidifier SSI-169

By U-Tech

₹10,029  

The U-Tech Control Box with Humidistat is a specialized accessory designed for use with the 5L Stainless Steel Humidifier SSI-169. It provides enhanced control and regulation of humidity levels in the environment where the humidifier is utilized.
The Control Box with Humidistat combines two essential components: the control box and the humidistat. The control box serves as the central unit that connects and controls the operation of the humidifier, while the humidistat measures and monitors the humidity levels in the surrounding area.
The control box typically features an interface with buttons, dials, or a digital display that allows users to adjust and set the desired humidity level. It also provides power distribution and protection for the humidifier, ensuring safe and reliable operation.
The humidistat component of the U-Tech Control Box with Humidistat continuously measures the humidity levels in the environment. It compares the measured humidity to the setpoint determined by the user and sends signals to the control box to regulate the operation of the humidifier accordingly. When the humidity falls below the setpoint, the control box activates the humidifier to increase moisture output, and vice versa when the humidity exceeds the setpoint.
The U-Tech Control Box with Humidistat offers precise and automated control of humidity levels, allowing users to maintain optimal conditions in various settings. It is particularly beneficial in environments where consistent and controlled humidity levels are critical, such as in laboratories, cleanrooms, or specific industrial processes.
To ensure compatibility and proper installation, it is recommended to refer to the specific product documentation and guidelines provided by U-Tech for the Control Box with Humidistat and the 5L Stainless Steel Humidifier SSI-169. The manufacturer's instructions will provide detailed information on how to integrate and operate the control box with the humidifier for optimal performance and efficiency.
By incorporating the U-Tech Control Box with Humidistat into the 5L Stainless Steel Humidifier SSI-169 setup, users gain enhanced control and regulation over humidity levels, allowing for a comfortable and controlled environment that meets specific requirements.

Add to Cart Buy Now

Ships within 8 days

U-Tech 3500 rpm Medico Centrifuge SSI-208

By U-Tech

₹5,899 - ₹21,239

The U-Tech 3500 rpm Medico Centrifuge SSI-208 is a high-performance centrifuge designed for medical and clinical laboratory applications. Engineered with precision and reliability in mind, the SSI-208 offers fast and efficient sample processing, making it an indispensable tool for medical professionals and researchers. At its core, the SSI-208 centrifuge features a powerful motor capable of reaching speeds of up to 3500 revolutions per minute (rpm), allowing for rapid separation of samples. This high-speed operation enables quick processing of blood, urine, and other biological fluids, facilitating timely diagnosis and analysis in clinical settings. The centrifuge is equipped with a sturdy rotor and sample holders designed to accommodate a variety of tube sizes and types. This versatility allows users to process different sample volumes and types simultaneously, maximizing throughput and efficiency in the laboratory. The SSI-208 centrifuge offers precise control over speed and acceleration, allowing users to tailor centrifugation parameters to specific sample requirements. This customization ensures optimal separation of sample components while minimizing damage or alteration to delicate biological materials. Safety is a top priority in medical laboratory settings, and the SSI-208 centrifuge is designed with built-in safety features to protect both users and samples. These features may include automatic lid locking mechanisms, imbalance detection systems, and sturdy construction to prevent accidents or sample spills during centrifugation. The compact and ergonomic design of the SSI-208 centrifuge makes it easy to integrate into laboratory workspaces, while its durable construction ensures long-term reliability and performance. The centrifuge may also feature a user-friendly interface with intuitive controls, simplifying operation for laboratory personnel. Compliance with international standards and regulations is ensured for the SSI-208 centrifuge, providing users with confidence in its safety and reliability. Rigorous quality control measures are implemented during manufacturing to guarantee consistent performance and accuracy.

Model No : SSI-208

Color : Silver

Speed : 3500 rpm

Application Area : Laboratories

Explore other Variants (4)

Ships within 8 days

U-Tech Monoblock Vacuum Pump With Crompton Motor SSI-171

By U-Tech

₹24,779 - ₹33,039

The U-Tech Monoblock Vacuum Pump for Laboratories, SSI-171, is a high-performance and reliable vacuum pump designed specifically for laboratory applications. Renowned for its efficiency, durability, and precision, this vacuum pump is engineered to meet the demanding requirements of scientific research, analytical chemistry, and industrial processes. The monoblock design of the vacuum pump integrates all essential components into a single compact unit, maximizing space efficiency and simplifying installation and maintenance. This streamlined design ensures optimal performance and reliability while minimizing downtime and maintenance costs. Equipped with a powerful motor and precision-engineered vacuum system, the SSI-171 vacuum pump delivers consistent and reliable vacuum performance across a wide range of applications. Whether used for degassing, filtration, or vacuum distillation, this vacuum pump provides the necessary vacuum levels with precision and accuracy. The vacuum pump is designed with user convenience in mind, featuring intuitive controls and easy-to-read indicators for monitoring vacuum levels and operational status. Additionally, safety features such as overheat protection and automatic shut-off mechanisms ensure operator safety and equipment protection during operation. Constructed from high-quality materials and precision-engineered components, the U-Tech Monoblock Vacuum Pump for Laboratories, SSI-171, offers exceptional durability and longevity, even under continuous use in demanding laboratory environments. Its robust construction and reliable performance make it an indispensable tool for laboratories, research facilities, and industrial settings requiring precise and consistent vacuum capabilities.

Type of Product : Monoblock Vacuum Pump

Model No : SSI-171

Voltage : 220-230 V AC

Pump Type : Beltless

Application Area : Laboratories

Motor Type : Electric Motor

Included Components : With Crompton Motor

Explore other Variants (2)

Ships within 6 days

U-Tech 0 - 60 minutes Automatic German Timer for Gyratory Sieve Shaker SSI-159

By U-Tech

₹50,739  

U-Tech 0 - 60 minutes Automatic German Timer for Gyratory Sieve Shaker SSI-159 is a sophisticated timing device commonly used in laboratory settings. It provides precise and automated control over timing intervals for various laboratory processes, experiments, and equipment operations.
The timer is designed with advanced features and functionalities to ensure accuracy, convenience, and reliability. It typically consists of a digital display that shows the countdown or elapsed time, along with buttons or knobs for setting the desired time intervals. The timer may also have additional functions such as programmability, multiple channels, and audible or visual alarms to alert users when the set time has elapsed.
One of the key advantages of an automatic German timer is its accuracy. These timers are built with high-precision quartz crystal oscillators or other timekeeping mechanisms that maintain accurate time measurements. This ensures precise control over timing intervals, critical for experiments requiring precise durations or synchronization with other lab processes.
The programmability feature allows users to pre-set multiple timing intervals, making it convenient for repetitive experiments or complex procedures. The timer can be programmed to execute a sequence of timed events, enabling automation and reducing manual intervention. This enhances efficiency, reduces errors, and frees up researchers' time for other tasks.
Furthermore, the multiple-channel functionality of an automatic German timer allows simultaneous control of multiple lab processes or equipment. Each channel can be independently programmed and monitored, providing flexibility and versatility in managing different timing requirements within a laboratory setup.
The audible or visual alarms integrated into the timer provide essential alerts to researchers or technicians. These alarms can be set to trigger at the end of a timing interval, ensuring timely attention to critical processes. This feature is particularly valuable when dealing with time-sensitive experiments or tasks that require immediate action or intervention upon completion.
The automatic German timer is compatible with various lab equipment, including shakers, incubators, ovens, and other devices that require precise timing control. Its versatility and adaptability make it a valuable tool in research, development, quality control, and other laboratory applications.
In conclusion, the automatic German timer for lab equipment offers precise, automated, and reliable timing control in laboratory environments. Its advanced features, including accuracy, programmability, multiple channels, and alarms, contribute to improved efficiency, accuracy, and convenience in conducting experiments and managing lab processes.

Add to Cart Buy Now

Related Searches

u-tech sieves

u-tech heating mantles

u-tech general laboratory equipments

u-tech distilling apparatus

u-tech orbital & linear shaker

Ships within 8 days

U-Tech Air Circulating Fan for Three Sides Element Universal Oven SSI-107

By U-Tech

₹18,879  

U-Tech Air Circulating Fan for Three Sides Element Universal Oven SSI-107 is an essential component of a universal oven that helps to distribute heat evenly throughout the oven chamber, ensuring uniform temperature and improved heating efficiency. It plays a crucial role in various applications, including cooking, baking, drying, and laboratory processes.
The primary purpose of an air circulating fan is to promote the circulation of hot air within the oven. It helps to overcome any temperature gradients or hotspots that may occur due to uneven heat distribution. By continuously circulating the air, the fan ensures that every part of the oven chamber receives the same amount of heat, resulting in consistent and uniform cooking or heating of the contents.
The fan is typically located at the back of the oven and is powered by an electric motor. As the motor rotates the fan blades, it creates a flow of air that is directed towards the oven walls and then circulated back towards the center. This convection current helps to transfer heat more efficiently to the food or products being heated.
The air circulation provided by the fan offers several benefits. First, it helps to reduce cooking or drying time by ensuring that heat reaches the food or products from all directions. This can result in faster cooking times, energy savings, and increased productivity in industrial settings.
Second, the air circulation helps to maintain a consistent temperature throughout the oven, preventing temperature fluctuations that can negatively affect the quality of the food or products. It ensures that items placed on different racks or positions within the oven receive the same level of heat, leading to uniform cooking, baking, or drying results.
Moreover, the even distribution of heat achieved by the air circulating fan can help to minimize the risk of overcooking or undercooking certain portions of the food. It promotes more consistent browning, texture, and flavor development, contributing to better overall cooking outcomes.
In summary, an air circulating fan is a vital component of a universal oven that enhances heat distribution and ensures uniform temperature throughout the oven chamber. By promoting efficient air circulation, the fan improves cooking, baking, and drying processes, resulting in consistent and high-quality outcomes. Its inclusion in ovens is particularly beneficial for achieving optimal results in various applications, from home cooking to industrial-scale production.

Add to Cart Buy Now

Ships within 10 days

U-Tech 6 x 2 x 2 ft Mild Steel Body Fume Hood for Laboratories SSI-128

By U-Tech

₹4,12,999  

U-Tech 6 x 2 x 2 ft Mild Steel Body Fume Hood for Laboratories SSI-128 is a safety device commonly used in laboratories and other workspaces to protect workers from hazardous fumes, gases, vapors, and airborne particles. It is designed to capture and contain these substances, preventing their release into the surrounding environment and minimizing the risk of exposure.
The primary function of a fume hood is to provide a controlled workspace where potentially dangerous materials can be handled safely. It consists of an enclosed chamber with a movable sash or front opening that allows access to the workspace. The interior of the fume hood is lined with chemically resistant materials to withstand corrosive substances.
A fume hood operates based on the principle of containment. When in use, it creates a negative pressure zone within the hood, drawing air and any airborne contaminants into the hood and away from the user. The fumes are then exhausted through a ventilation system, typically connected to a fume duct, which carries the contaminants to an appropriate exhaust system or treatment.
Fume hoods are equipped with various safety features to ensure proper operation and protection. These include a sash or window that can be adjusted to control the airflow, baffles or slots at the back of the hood to maintain proper air distribution, and airflow monitors to indicate the hood's performance.
Different types of fume hoods are available to suit specific applications and requirements. These include ducted fume hoods, which are connected to an external exhaust system, and ductless fume hoods, which use filters to remove and neutralize contaminants before recirculating the air. There are also specialized hoods, such as radioisotope hoods and perchloric acid hoods, designed for specific hazardous materials.
Proper use and maintenance of fume hoods are crucial for their effective operation. Users must position themselves correctly within the hood to ensure optimal airflow and containment. Regular inspections, testing, and certification are necessary to verify that the hood meets safety standards and is functioning correctly.
Fume hoods are essential safety devices in laboratories, research facilities, and industrial settings where hazardous materials are handled. They provide a critical barrier between workers and potentially harmful substances, minimizing the risk of exposure and promoting a safe working environment.
In summary, a fume hood is a safety device used to protect workers from hazardous fumes, gases, and vapors. It creates a controlled workspace by capturing and containing these substances, preventing their release into the surrounding environment. Fume hoods are equipped with safety features and ventilation systems to ensure proper airflow and exhaust. They are crucial in maintaining a safe working environment in laboratories and other workplaces where hazardous materials are handled.

Add to Cart Buy Now

Ships within 15 days

U-Tech Moisture Trap With Regulator for Rotary Vacuum Pump SSI-172

By U-Tech

₹6,607  

The U-Tech Moisture Trap with Regulator is a specialized accessory designed to be used in conjunction with the Rotary Vacuum Pump SSI-172. It serves two primary functions: trapping moisture or condensable vapors from the vacuum system and regulating the pressure within the system.
Moisture traps are commonly employed in vacuum systems to prevent the entry of liquid or moisture into the pump. When operating a rotary vacuum pump, it is essential to protect the pump from potentially damaging substances such as water or other condensable vapors. The U-Tech Moisture Trap is specifically designed to trap and remove these substances, ensuring the longevity and optimal performance of the SSI-172 rotary vacuum pump.
The moisture trap component of the U-Tech Moisture Trap with Regulator typically consists of a chamber or reservoir filled with a desiccant material or other absorbent substance. As the vacuum system operates, any moisture or condensable vapors are captured and retained by the desiccant, preventing them from reaching the pump.
Additionally, the U-Tech Moisture Trap with Regulator incorporates a pressure regulator feature. This allows users to adjust and maintain the desired pressure setpoint within the vacuum system. By regulating the pressure, the device ensures stability and accuracy in maintaining the desired vacuum levels for efficient operation of the SSI-172 rotary vacuum pump.
The U-Tech Moisture Trap with Regulator is designed to provide a convenient and integrated solution for moisture control and pressure regulation in conjunction with the SSI-172 rotary vacuum pump. However, it's important to refer to the specific product documentation and manufacturer guidelines for detailed information on the U-Tech Moisture Trap with Regulator and its operation with the SSI-172 rotary vacuum pump.
By incorporating a moisture trap and pressure regulator into a single device, the U-Tech Moisture Trap with Regulator offers enhanced functionality and convenience, allowing users to protect their vacuum system from moisture or condensable vapors and maintain precise control over the pressure levels for optimal performance of the SSI-172 rotary vacuum pump.

Add to Cart Buy Now

Ships within 10 days

U-Tech DB 200 Double Bed Deionizer for Laboratories SSI-145

By U-Tech

₹64,899  

U-Tech DB 200 Double Bed Deionizer for Laboratories SSI-145 is a type of water treatment system designed to remove ions from water and produce purified water for various applications. It consists of two beds filled with ion exchange resins, each bed performing a specific function in the deionization process.
The first bed in a double bed deionizer is known as the cation exchange resin bed. This bed contains cation exchange resin that attracts and exchanges positively charged ions (cations) in the water with hydrogen ions. Common cations removed from the water include calcium, magnesium, sodium, and iron. This process effectively softens the water and removes these mineral ions.
The second bed is the anion exchange resin bed. This bed contains anion exchange resin that attracts and exchanges negatively charged ions (anions) in the water with hydroxide ions. Common anions removed from the water include chloride, sulfate, nitrate, and carbonate. This process further purifies the water by removing these impurities.
The double bed deionizer operates in a series configuration, with the water passing through the cation exchange resin bed first and then through the anion exchange resin bed. By utilizing two distinct beds, the system can achieve a higher level of purity compared to a single-bed deionizer.
The ion exchange resins in the beds have a finite capacity for ion removal. Over time, as the resins become saturated with ions, their effectiveness decreases. To regenerate the system, a regeneration process is performed. During regeneration, the resins are subjected to specific chemicals or processes to restore their ion exchange capacity. This ensures the continued effectiveness of the double bed deionizer.
Double bed deionizers are commonly used in various industries and applications where high-purity water is required. These include laboratory research, pharmaceutical manufacturing, electronics production, power generation, and more. The purified water produced by a double bed deionizer can be used for equipment calibration, chemical analysis, rinsing of precision instruments, and other critical processes that demand ultra-pure water.
In summary, a double bed deionizer is a water treatment system that utilizes two beds of ion exchange resins to remove cations and anions from water, producing highly purified water. Its configuration allows for increased purity compared to single-bed deionizers, making it suitable for a range of applications that require high-quality, deionized water.

Add to Cart Buy Now

Ships within 10 days

U-Tech 4 x 2 x 2 ft Mild Steel Body Fume Hood for Laboratories SSI-128

By U-Tech

₹4,12,999  

U-Tech 4 x 2 x 2 ft Mild Steel Body Fume Hood for Laboratories SSI-128 is a safety device commonly used in laboratories and other workspaces to protect workers from hazardous fumes, gases, vapors, and airborne particles. It is designed to capture and contain these substances, preventing their release into the surrounding environment and minimizing the risk of exposure.
The primary function of a fume hood is to provide a controlled workspace where potentially dangerous materials can be handled safely. It consists of an enclosed chamber with a movable sash or front opening that allows access to the workspace. The interior of the fume hood is lined with chemically resistant materials to withstand corrosive substances.
A fume hood operates based on the principle of containment. When in use, it creates a negative pressure zone within the hood, drawing air and any airborne contaminants into the hood and away from the user. The fumes are then exhausted through a ventilation system, typically connected to a fume duct, which carries the contaminants to an appropriate exhaust system or treatment.
Fume hoods are equipped with various safety features to ensure proper operation and protection. These include a sash or window that can be adjusted to control the airflow, baffles or slots at the back of the hood to maintain proper air distribution, and airflow monitors to indicate the hood's performance.
Different types of fume hoods are available to suit specific applications and requirements. These include ducted fume hoods, which are connected to an external exhaust system, and ductless fume hoods, which use filters to remove and neutralize contaminants before recirculating the air. There are also specialized hoods, such as radioisotope hoods and perchloric acid hoods, designed for specific hazardous materials.
Proper use and maintenance of fume hoods are crucial for their effective operation. Users must position themselves correctly within the hood to ensure optimal airflow and containment. Regular inspections, testing, and certification are necessary to verify that the hood meets safety standards and is functioning correctly.
Fume hoods are essential safety devices in laboratories, research facilities, and industrial settings where hazardous materials are handled. They provide a critical barrier between workers and potentially harmful substances, minimizing the risk of exposure and promoting a safe working environment.
In summary, a fume hood is a safety device used to protect workers from hazardous fumes, gases, and vapors. It creates a controlled workspace by capturing and containing these substances, preventing their release into the surrounding environment. Fume hoods are equipped with safety features and ventilation systems to ensure proper airflow and exhaust. They are crucial in maintaining a safe working environment in laboratories and other workplaces where hazardous materials are handled.

Add to Cart Buy Now

Ships within 15 days

U-Tech 5 L Stainless Steel Humidifier for Laboratories SSI-169

By U-Tech

₹42,479  

The U-Tech 5L Stainless Steel Humidifier, specifically designed for laboratory use, is a device used to increase and regulate humidity levels in laboratory environments. It offers a reliable and efficient solution for maintaining optimal humidity conditions necessary for various laboratory procedures and experiments.
The SSI-169 model of the U-Tech 5L Stainless Steel Humidifier is specifically tailored for laboratory applications, offering a capacity of 5 liters, which allows for sustained operation and consistent moisture output. The stainless steel construction ensures durability, resistance to corrosion, and ease of cleaning, making it suitable for laboratory settings where cleanliness and hygiene are crucial.
The U-Tech 5L Stainless Steel Humidifier utilizes advanced technology to generate and disperse moisture into the laboratory environment. It typically features a water reservoir or tank that can hold up to 5 liters of water. The humidifier incorporates mechanisms to convert water into fine mist or vapor, which is then released into the laboratory space to increase humidity levels.
The humidifier may include control options such as adjustable output settings or a built-in humidistat to precisely regulate humidity levels based on specific requirements. This allows users to maintain a consistent and controlled environment suitable for various laboratory applications, such as cell culture, sample storage, or experimental setups that demand specific humidity conditions.
The U-Tech 5L Stainless Steel Humidifier for Laboratories, SSI-169, is designed to be user-friendly and reliable, offering ease of operation and maintenance. It is crucial to follow the manufacturer's instructions and guidelines for proper installation, usage, and maintenance to ensure optimal performance and longevity of the humidifier.
By incorporating the U-Tech 5L Stainless Steel Humidifier into laboratory settings, researchers and scientists can create and maintain controlled humidity conditions essential for their experiments, processes, and equipment. It provides a reliable and efficient solution to achieve and maintain the desired humidity levels, contributing to the accuracy and success of laboratory procedures and research.

Add to Cart Buy Now

Ships within 15 days

U-Tech Double Stage Rotary Vacuum Pump With Equivalent Motor SSI-172

By U-Tech

₹42,479 - ₹1,76,999

The U-Tech Double Stage Rotary Vacuum Pump With Equivalent Motor SSI-172 is a high-performance and versatile vacuum pump designed for a wide range of laboratory and industrial applications. Combining efficiency, durability, and precision, this vacuum pump is engineered to meet the demanding requirements of scientific research, analytical chemistry, and industrial processes. Featuring a double-stage rotary design, this vacuum pump provides enhanced vacuum performance compared to single-stage models. The dual-stage configuration allows for greater vacuum depth and efficiency, making it ideal for applications such as vacuum filtration, degassing, distillation, and vacuum drying. Equipped with an equivalent motor, the SSI-172 vacuum pump delivers reliable and consistent performance, ensuring optimal vacuum levels with precision and accuracy. The powerful motor drives the rotary vane mechanism, generating the necessary vacuum for a wide range of laboratory processes. The vacuum pump is designed for user convenience, with intuitive controls and easy-to-read indicators for monitoring vacuum levels and operational status. Safety features such as overheat protection and automatic shut-off mechanisms ensure operator safety and equipment protection during operation. Constructed from high-quality materials and precision-engineered components, the U-Tech Double Stage Rotary Vacuum Pump With Equivalent Motor SSI-172 offers exceptional durability and longevity, even under continuous use in demanding laboratory environments. Its robust construction and reliable performance make it an indispensable tool for laboratories, research facilities, and industrial settings requiring precise and consistent vacuum capabilities.

Type of Product : Rotary Vacuum Pump

Model No : SSI-172

Speed : 1400 rpm

Voltage : 220-230 V AC

No. of Stages : Double Stage

Application Area : Laboratories

Motor Type : Electric Motor

Included Components : With Equivalent Motor

Base Material : Steel

Explore other Variants (7)

Ships within 15 days

U-Tech 0 - 60 minutes Automatic German Timer for Table Top Sieve Shaker SSI-158

By U-Tech

₹6,843  

U-Tech 0 - 60 minutes Automatic German Timer for Table Top Sieve Shaker SSI-158 is a sophisticated timing device commonly used in laboratory settings. It provides precise and automated control over timing intervals for various laboratory processes, experiments, and equipment operations.
The timer is designed with advanced features and functionalities to ensure accuracy, convenience, and reliability. It typically consists of a digital display that shows the countdown or elapsed time, along with buttons or knobs for setting the desired time intervals. The timer may also have additional functions such as programmability, multiple channels, and audible or visual alarms to alert users when the set time has elapsed.
One of the key advantages of an automatic German timer is its accuracy. These timers are built with high-precision quartz crystal oscillators or other timekeeping mechanisms that maintain accurate time measurements. This ensures precise control over timing intervals, critical for experiments requiring precise durations or synchronization with other lab processes.
The programmability feature allows users to pre-set multiple timing intervals, making it convenient for repetitive experiments or complex procedures. The timer can be programmed to execute a sequence of timed events, enabling automation and reducing manual intervention. This enhances efficiency, reduces errors, and frees up researchers' time for other tasks.
Furthermore, the multiple-channel functionality of an automatic German timer allows simultaneous control of multiple lab processes or equipment. Each channel can be independently programmed and monitored, providing flexibility and versatility in managing different timing requirements within a laboratory setup.
The audible or visual alarms integrated into the timer provide essential alerts to researchers or technicians. These alarms can be set to trigger at the end of a timing interval, ensuring timely attention to critical processes. This feature is particularly valuable when dealing with time-sensitive experiments or tasks that require immediate action or intervention upon completion.
The automatic German timer is compatible with various lab equipment, including shakers, incubators, ovens, and other devices that require precise timing control. Its versatility and adaptability make it a valuable tool in research, development, quality control, and other laboratory applications.
In conclusion, the automatic German timer for lab equipment offers precise, automated, and reliable timing control in laboratory environments. Its advanced features, including accuracy, programmability, multiple channels, and alarms, contribute to improved efficiency, accuracy, and convenience in conducting experiments and managing lab processes.

Add to Cart Buy Now

Ships within 15 days

U-Tech 250 x 125 mm Tissue Flotation Bath for Laboratories SSI-139

By U-Tech

₹31,859  

U-Tech 250 x 125 mm Tissue Flotation Bath for Laboratories SSI-139 is a specialized laboratory equipment used in histology and pathology laboratories for the preparation of tissue sections. It provides a controlled and consistent temperature environment for the flotation and flattening of tissue samples onto microscope slides.
The tissue floatation bath consists of a water bath with precise temperature control and a platform for holding the microscope slides. The water bath is typically made of stainless steel or high-quality plastic and is filled with water or a specific flotation medium. The temperature control mechanism, usually a digital thermostat or temperature controller, allows the user to set and maintain the desired temperature.
The main purpose of the tissue floatation bath is to provide a warm and stable platform for tissue sections to float on the surface of the water or flotation medium. This floating process aids in the optimal spreading and flattening of the tissue sections, enabling them to adhere uniformly to microscope slides.
To prepare tissue sections, the histotechnologist places the tissue sample onto a water-repellent microscope slide. The slide with the tissue is then placed onto the surface of the water or flotation medium in the tissue floatation bath. The warm temperature of the bath softens the paraffin wax or other embedding medium surrounding the tissue, allowing the tissue section to float on the surface.
The gentle agitation or slight movement of the water bath helps to ensure even distribution of the tissue sections on the slides and minimizes wrinkles or folds. After the desired floating time, the slides are carefully lifted out of the bath, and excess liquid is drained off.
The tissue sections on the slides can then undergo further processing steps, such as staining, immunohistochemistry, or microscopy analysis.
The tissue floatation bath offers several advantages in histology laboratories. It provides consistent and controlled temperature conditions, ensuring the optimal flotation and flattening of tissue sections. The use of a tissue floatation bath helps to prevent tissue damage, distortions, or artifacts during the preparation process, resulting in high-quality and reproducible slides.
In summary, a tissue floatation bath is a specialized laboratory equipment used in histology and pathology laboratories. It provides a controlled temperature environment for the flotation and flattening of tissue sections onto microscope slides. The bath enables optimal tissue section spreading, ensuring high-quality and consistent preparations for subsequent staining and analysis.

Add to Cart Buy Now

Ships within 15 days

U-Tech Single Stage Rotary Vacuum Pump With Equivalent Motor SSI-172

By U-Tech

₹36,579 - ₹1,53,399

The U-Tech Single Stage Rotary Vacuum Pump With Equivalent Motor SSI-172 is a high-quality and versatile vacuum pump designed to meet the diverse needs of laboratory and industrial applications. Renowned for its efficiency, durability, and precision, this vacuum pump delivers reliable performance across a wide range of vacuum processes. Featuring a single-stage rotary design, this vacuum pump provides efficient and consistent vacuum performance suitable for various applications. Whether used for vacuum filtration, degassing, distillation, or vacuum drying, the SSI-172 vacuum pump ensures optimal vacuum levels with precision and accuracy. Equipped with an equivalent motor, this vacuum pump delivers reliable and consistent performance, ensuring smooth operation and consistent vacuum levels. The powerful motor drives the rotary vane mechanism, generating the necessary vacuum for a wide range of laboratory processes. Designed for user convenience, the vacuum pump features intuitive controls and easy-to-read indicators for monitoring vacuum levels and operational status. Safety features such as overheat protection and automatic shut-off mechanisms ensure operator safety and equipment protection during operation. Constructed from high-quality materials and precision-engineered components, the U-Tech Single Stage Rotary Vacuum Pump With Equivalent Motor SSI-172 offers exceptional durability and longevity, even under continuous use in demanding laboratory environments. Its robust construction and reliable performance make it an indispensable tool for laboratories, research facilities, and industrial settings requiring precise and consistent vacuum capabilities.

Type of Product : Rotary Vacuum Pump

Model No : SSI-172

Speed : 1400 rpm

Voltage : 220-230 V AC

No. of Stages : Single Stage

Application Area : Laboratories

Motor Type : Electric Motor

Included Components : With Equivalent Motor

Base Material : Steel

Explore other Variants (7)

Ships within 15 days

U-Tech Non Return Valve for Rotary Vacuum Pump SSI-172

By U-Tech

₹3,421  

A non-return valve, also known as a check valve, is a device commonly used in rotary vacuum pumps to control the flow of gases or fluids in a single direction. It allows fluid or gas to flow in one direction while preventing reverse flow or backflow.
In the context of the Rotary Vacuum Pump SSI-172, the U-Tech Non Return Valve is likely a specific variant or model of a non-return valve designed to be compatible with that particular pump. While specific information about the U-Tech Non Return Valve for the SSI-172 is not readily available, I can provide you with a general understanding of non-return valves and their function in rotary vacuum pumps.
A non-return valve typically consists of a valve body, a closure mechanism, and a spring. The valve body contains an inlet and an outlet port, and the closure mechanism is designed to allow fluid or gas to flow in one direction while preventing flow in the opposite direction. The spring provides the necessary force to ensure proper sealing and prevent leakage.
In a rotary vacuum pump, the non-return valve is typically positioned between the pump and the system being evacuated. It allows gases or fluids to be pulled into the pump during the suction stroke while preventing backflow when the pump's rotation changes direction.
The non-return valve ensures that the evacuated system maintains the desired vacuum level by preventing the reverse flow of gas or fluid back into the system. This helps maintain the integrity of the vacuum and prevents contamination or disruption of the process.
The specific design and specifications of the U-Tech Non Return Valve for the SSI-172 may vary based on factors such as flow rate, pressure range, and compatibility with the pump. It is essential to consult the product documentation or reach out to the manufacturer for detailed information on the U-Tech Non Return Valve and its compatibility with the Rotary Vacuum Pump SSI-172.
By incorporating a non-return valve into the rotary vacuum pump system, it ensures efficient operation, prevents contamination, and helps maintain the desired vacuum levels for various industrial and scientific applications.

Add to Cart Buy Now

Ships within 15 days

U-Tech 0.25 HP Motor Jar Laboratory Type Ball Mill SSI-165

By U-Tech

₹44,839 - ₹56,639

The U-Tech 0.25 HP Motor Jar Laboratory Type Ball Mill SSI-165 is a high-quality milling apparatus designed for laboratory use in various scientific and industrial applications. Featuring a 0.25 horsepower motor, this ball mill is capable of efficiently milling a wide range of materials with precision and reliability. This laboratory type ball mill is equipped with a jar, which serves as the milling container, allowing for controlled milling of samples. The jar's design ensures proper containment of materials during the milling process, preventing spillage and ensuring safety. The ball mill's motor provides sufficient power to drive the milling process, enabling the efficient grinding and mixing of materials. Its compact size and laboratory-friendly design make it suitable for use in research settings, educational institutions, and quality control laboratories. Additionally, the U-Tech SSI-165 ball mill is engineered for durability and long-term performance, ensuring consistent results over extended periods of use. Its robust construction and high-quality components contribute to its reliability and longevity. Whether used for grinding, mixing, or homogenizing samples, the U-Tech 0.25 HP Motor Jar Laboratory Type Ball Mill SSI-165 offers versatility and efficiency in laboratory milling operations. Its compact size, powerful motor, and reliable performance make it an essential tool for scientific research, material testing, and quality assurance applications.

Type of Product : Laboratory Type Ball Mill

Model No : SSI-165

Voltage : 220 V AC

Application Area : Laboratories

Motor Power (HP) : 0.25 HP

Motor Speed : 80 rpm

Explore other Variants (3)

Ships within 15 days

U-Tech Mild Steel Chamber Arthur H.Thomas Type Lab Willey Grinder SSI-165

By U-Tech

₹56,639 - ₹1,06,199

The U-Tech 65 x 25 mm Mild Steel Chamber Arthur H.Thomas Type Lab Willey Grinder SSI-165 is a laboratory device used for pulverizing and grinding a variety of materials into fine powders. It is named after its inventor, Arthur H. Thomas, and is commonly found in research laboratories, pharmaceutical companies, and academic institutions.
The Willey Grinder consists of a motorized base unit and a grinding chamber. The base unit contains an electric motor that drives the grinding mechanism. The grinding chamber, which is typically made of stainless steel, houses the grinding components and is designed to withstand the forces generated during the grinding process.
The grinding mechanism of the Willey Grinder consists of a series of sharp blades or knives that are mounted on a rotor within the grinding chamber. The rotor rotates at high speeds, causing the blades to impact and cut the material placed in the chamber. This cutting and shearing action reduces the size of the particles and transforms them into fine powders.
The Willey Grinder is highly versatile and can handle a wide range of materials, including plant and animal tissues, seeds, soils, rocks, and chemicals. It is particularly useful for grinding samples that are difficult to grind using other methods, such as fibrous or tough materials. The grinder can be adjusted to control the fineness of the final product by changing the speed of the motor or the clearance between the blades and the chamber.
One key advantage of the Willey Grinder is its ability to process large quantities of material quickly and efficiently. This makes it suitable for applications that require high-throughput grinding, such as sample preparation for analysis, extraction of compounds, or homogenization of mixtures.
To operate the Willey Grinder, the material to be ground is loaded into the grinding chamber, and the lid is securely closed. The motor is then switched on, and the rotation of the rotor causes the blades to grind the material. The ground powder collects at the bottom of the chamber or can be collected using a removable tray.
It is important to note that safety precautions should be followed when using the Willey Grinder. Operators should wear appropriate protective equipment, such as gloves and safety goggles, to prevent injuries. Additionally, care should be taken to ensure that the material being ground is compatible with the grinder's capabilities and that the grinder is properly cleaned and maintained to avoid cross-contamination between samples.
In summary, the Arthur H. Thomas Type Lab Willey Grinder is a powerful and versatile laboratory device used for grinding a wide range of materials into fine powders. Its robust design, high throughput capacity, and adjustable fineness make it a valuable tool for various applications in research and industry.

Type of Product : Arthur H.Thomas Type Lab Willey Grinder

Model No : SSI-165

Color : White

Application Area : Laboratories

Chamber Material : Mild Steel

Motor Power (HP) : 0.25 HP

Explore other Variants (4)

Ships within 15 days

U-Tech Stainless Steel Chamber Arthur H.Thomas Type Lab Willey Grinder SSI-165

By U-Tech

₹48,379 - ₹1,41,599

The U-Tech 65 x 25 mm Stainless Steel Chamber Arthur H.Thomas Type Lab Willey Grinder SSI-165 is a laboratory device used for pulverizing and grinding a variety of materials into fine powders. It is named after its inventor, Arthur H. Thomas, and is commonly found in research laboratories, pharmaceutical companies, and academic institutions.
The Willey Grinder consists of a motorized base unit and a grinding chamber. The base unit contains an electric motor that drives the grinding mechanism. The grinding chamber, which is typically made of stainless steel, houses the grinding components and is designed to withstand the forces generated during the grinding process.
The grinding mechanism of the Willey Grinder consists of a series of sharp blades or knives that are mounted on a rotor within the grinding chamber. The rotor rotates at high speeds, causing the blades to impact and cut the material placed in the chamber. This cutting and shearing action reduces the size of the particles and transforms them into fine powders.
The Willey Grinder is highly versatile and can handle a wide range of materials, including plant and animal tissues, seeds, soils, rocks, and chemicals. It is particularly useful for grinding samples that are difficult to grind using other methods, such as fibrous or tough materials. The grinder can be adjusted to control the fineness of the final product by changing the speed of the motor or the clearance between the blades and the chamber.
One key advantage of the Willey Grinder is its ability to process large quantities of material quickly and efficiently. This makes it suitable for applications that require high-throughput grinding, such as sample preparation for analysis, extraction of compounds, or homogenization of mixtures.
To operate the Willey Grinder, the material to be ground is loaded into the grinding chamber, and the lid is securely closed. The motor is then switched on, and the rotation of the rotor causes the blades to grind the material. The ground powder collects at the bottom of the chamber or can be collected using a removable tray.
It is important to note that safety precautions should be followed when using the Willey Grinder. Operators should wear appropriate protective equipment, such as gloves and safety goggles, to prevent injuries. Additionally, care should be taken to ensure that the material being ground is compatible with the grinder's capabilities and that the grinder is properly cleaned and maintained to avoid cross-contamination between samples.
In summary, the Arthur H. Thomas Type Lab Willey Grinder is a powerful and versatile laboratory device used for grinding a wide range of materials into fine powders. Its robust design, high throughput capacity, and adjustable fineness make it a valuable tool for various applications in research and industry.

Type of Product : Arthur H.Thomas Type Lab Willey Grinder

Model No : SSI-165

Color : White

Application Area : Laboratories

Chamber Material : Stainless Steel

Motor Power (HP) : 0.25 HP

Explore other Variants (4)

Ships within 15 days

U-Tech Stainless Steel Aerosol Disinfector SSI-168

By U-Tech

₹20,059 - ₹29,499

U-Tech 5 L Stainless Steel Aerosol Disinfector SSI-168 is a device designed to disinfect and sanitize indoor spaces by dispersing a fine mist or aerosolized solution of disinfectant into the air. It is commonly used in various settings such as hospitals, offices, schools, and public transportation to control the spread of infectious diseases and maintain a clean environment.
The aerosol disinfector works by converting liquid disinfectants into tiny droplets or particles that can remain suspended in the air for an extended period. These disinfectant particles are then dispersed throughout the targeted area using a nozzle or sprayer. The size of the droplets produced can vary depending on the specific device, but they are typically small enough to remain airborne for a sufficient amount of time to reach and disinfect surfaces, including those that are difficult to access manually.
The disinfectant solution used in aerosol disinfectors is typically a combination of chemicals that have proven efficacy in killing or neutralizing a wide range of microorganisms, including bacteria, viruses, and fungi. Common disinfectants used in these devices include hydrogen peroxide, quaternary ammonium compounds, and hypochlorous acid.
Aerosol disinfectors offer several advantages. First, they can effectively cover large areas and reach spaces that may be challenging to clean using traditional methods. Second, they provide a more consistent and uniform distribution of the disinfectant, ensuring thorough coverage and reducing the risk of missed spots. Third, they can be used on both porous and non-porous surfaces, making them versatile for various environments.
However, it is important to note that the use of aerosol disinfectors should be accompanied by proper safety measures. This includes ensuring the selected disinfectant is suitable for the intended space and following the manufacturer's instructions regarding usage, concentration, and contact time. Additionally, adequate ventilation is crucial to prevent the buildup of potentially harmful chemicals in the air.
In conclusion, aerosol disinfectors are valuable tools in the fight against infectious diseases, offering an efficient and comprehensive method of disinfection. Their ability to disperse a fine mist of disinfectant throughout an area makes them highly effective in reaching and treating surfaces that are difficult to clean by conventional means. However, proper usage and adherence to safety guidelines are essential to maximize their effectiveness while minimizing potential risks.

Type of Product : Aerosol Disinfector

Material : Stainless Steel

Model No : SSI-168

Color : Silver

Voltage : 220-230 V AC

Application Area : Laboratories

Explore other Variants (2)

Ships within 15 days

U-Tech Adaptor for Gyratory Sieve Shaker SSI-159

By U-Tech

₹17,699  

U-Tech Adaptor for Gyratory Sieve Shaker SSI-159 is a device that is used to convert, modify, or regulate electrical power to meet the specific requirements of laboratory instruments. It plays a critical role in ensuring that the equipment receives the correct voltage, current, and power characteristics necessary for safe and efficient operation.
In laboratory settings, different instruments may have varying power input specifications, or there may be a need to convert the power supply to a different voltage or frequency. Power adaptors provide a reliable and stable power source, protecting the equipment from damage due to incorrect power input.
Power adaptors come in various types and configurations to accommodate different power requirements in the lab. Some common types include voltage converters, AC to DC adaptors, step-up/step-down transformers, and voltage regulators.
Voltage converters are used when the available power supply voltage is different from the required voltage of the equipment. They convert the input voltage to the specific voltage needed by the instrument, ensuring compatibility and safe operation.
AC to DC adaptors, also known as rectifiers or power converters, are used when laboratory instruments require direct current (DC) power instead of alternating current (AC) power. These adaptors convert the incoming AC power to the appropriate DC voltage and current needed by the equipment.
Step-up/step-down transformers are used to adjust the voltage level of the power supply. Step-up transformers increase the voltage output, while step-down transformers reduce the voltage. They are useful when the available power supply voltage does not match the required voltage of the equipment.
Voltage regulators are used to maintain a constant voltage output despite fluctuations or variations in the input power supply. They provide a stable and regulated power source, protecting sensitive laboratory equipment from voltage spikes or fluctuations.
When selecting a power adaptor for lab equipment, it is important to consider factors such as the required voltage, current, power rating, and frequency of the equipment. Safety is also a crucial consideration, so it is essential to choose adaptors that comply with safety standards and have features such as overload protection, short-circuit protection, and proper grounding to prevent electrical hazards.
In conclusion, power adaptors for lab equipment are vital components that ensure the proper and safe operation of laboratory instruments. They convert, modify, or regulate electrical power to meet the specific requirements of the equipment, ensuring compatibility and preventing damage. Careful consideration of power requirements, safety features, and compliance with electrical standards is crucial when selecting and using power adaptors in the laboratory.

Add to Cart Buy Now

Ships within 15 days

U-Tech Digital Timer for Gyratory Sieve Shaker SSI-159

By U-Tech

₹17,699  

U-Tech Digital Timer for Gyratory Sieve Shaker SSI-159 is a versatile and essential tool used in laboratory settings to precisely measure and control time intervals for various experiments, processes, and equipment operations. It is designed to provide accurate and reliable timing capabilities with user-friendly features and functionalities.
Digital timers for lab equipment typically consist of a digital display, control buttons or knobs, and various timing modes and settings. The digital display shows the elapsed time or countdown, allowing users to monitor the progress of the timed activity. The control buttons or knobs enable easy adjustment and programming of the desired time intervals.
One of the primary advantages of a digital timer is its high accuracy. These timers are equipped with advanced quartz crystal oscillators or other timekeeping mechanisms that ensure precise time measurements. This accuracy is crucial for experiments or processes that require precise timing, synchronization, or coordination with other lab operations.
Digital timers for lab equipment often provide multiple timing modes and settings to accommodate diverse laboratory needs. These may include countdown mode, count-up mode, interval timing, and programmable presets. Countdown mode allows users to set a specific time duration and monitor the remaining time until completion. Count-up mode measures the elapsed time from a starting point. Interval timing allows for repetitive or periodic timing cycles, such as alternating on/off cycles for equipment operation. Programmable presets enable users to save and recall frequently used timing parameters, enhancing convenience and efficiency in repeated experiments or procedures.
Many digital timers also incorporate additional features, such as audible alarms, visual indicators, and memory functions. Audible alarms can be set to sound when the desired time interval is reached, ensuring timely attention to critical processes or experiments. Visual indicators, such as LED lights or flashing displays, provide clear visual cues to indicate timing status. Memory functions allow users to store and retrieve multiple timing parameters, eliminating the need for repetitive manual input.
Digital timers for lab equipment are compact, portable, and widely compatible with various laboratory devices and instruments. They can be easily integrated into experimental setups or connected to equipment to provide precise timing control and automation. Their versatility and reliability make them indispensable tools for researchers, technicians, and scientists across different scientific disciplines.
In conclusion, digital timers for lab equipment offer accurate and precise timing control for a wide range of laboratory applications. With their user-friendly features, multiple timing modes, and additional functions, they enhance efficiency, accuracy, and convenience in experimental procedures, equipment operations, and time-dependent processes in the lab.

Add to Cart Buy Now

Ships within 15 days

U-Tech 203.2 mm (8 Inch) Dia Sieve 0.25 HP Motor Power Gyratory Sieve Shaker SSI-159

By U-Tech

₹87,319  

The U-Tech 8 Inch Dia Sieve 0.25 HP Motor Power Gyratory Sieve Shaker SSI-159 is a specialized laboratory instrument used for particle size analysis and grading of granular materials. It is widely used in industries such as pharmaceuticals, mining, construction, and agriculture to determine the particle size distribution in samples.
The gyratory sieve shaker consists of a motorized drive unit that imparts a gyratory motion to the sieve stack. The sieve stack is typically made up of a series of stacked sieves, with the sample placed on the top sieve. The sieves are arranged in ascending order of mesh size, with the finest sieve at the bottom and the coarsest sieve at the top.
During operation, the motorized drive unit generates a gyratory motion, causing the sample to move in a gyratory pattern on the sieve stack. This motion allows the particles to pass through the openings of the sieves, resulting in the separation of the sample into different size fractions.
The gyratory motion of the sieve shaker is a combination of rotational and tapping movements. The rotational motion ensures that the particles are evenly distributed on the sieves, while the tapping motion helps to dislodge any trapped particles and prevent blinding of the sieve openings.
One of the advantages of the gyratory sieve shaker is its ability to handle large sample quantities. The gyratory motion effectively disperses and separates the particles, allowing for accurate analysis of bulk samples. It is particularly useful for materials with high moisture content or cohesive properties that tend to agglomerate.
The gyratory sieve shaker offers reliable and consistent results, as the gyratory motion ensures uniform agitation and tapping of the sieve stack. This reduces operator variability and improves the accuracy and reproducibility of particle size analysis.
Additionally, the gyratory sieve shaker may include features such as adjustable amplitude and timing controls. These features allow users to customize the agitation intensity and duration according to the specific requirements of the sample being analyzed. The ability to adjust the parameters enhances the versatility of the sieve shaker, enabling it to accommodate a wide range of materials and achieve precise results.
After the sieving process, the retained particles on each sieve are carefully collected, dried, and weighed to determine the percentage of each size fraction in the sample. This information is vital for various applications, including quality control, material characterization, and process optimization.
In summary, the gyratory sieve shaker is a specialized laboratory instrument used for particle size analysis and grading of granular materials. Its gyratory motion and tapping action effectively separate particles into different size fractions. The sieve shaker can handle large sample quantities, offers reliable results, and can be customized for specific sample requirements. It is a valuable tool in various industries, contributing to quality assurance, research, and development of materials.

Add to Cart Buy Now

Ships within 15 days

U-Tech Yoder Type Wet Sieve Shaker With GI Tank SSI-161

By U-Tech

₹74,339 - ₹1,12,099

The U-Tech Yoder Type Wet Sieve Shaker with GI (Galvanized Iron) Tank SSI-161 is a specialized instrument engineered to perform accurate wet sieving operations in various laboratory and industrial settings. This equipment is designed to efficiently separate particles and solids from liquid suspensions, ensuring precise particle size analysis for a wide range of materials. The SSI-161 features a durable galvanized iron tank that provides excellent corrosion resistance and durability, making it suitable for handling various liquids and samples in wet sieving applications. The tank's robust construction ensures longevity and reliability, even when dealing with corrosive substances or harsh chemical solutions. Equipped with a Yoder type wet sieving mechanism, the SSI-161 efficiently agitates the sample and suspends particles in the liquid medium, facilitating the passage of finer particles through the sieve mesh while retaining larger particles. This mechanism ensures consistent and accurate particle separation, allowing for reliable particle size analysis. The sieve shaker is outfitted with precision-engineered sieve decks, featuring high-quality mesh with precise mesh sizes tailored to the specific requirements of the application. These sieve decks provide reliable particle separation and are easily interchangeable to accommodate different particle size ranges and sample types. Advanced control features allow users to adjust agitation speed and duration according to the characteristics of the sample, ensuring optimal sieving efficiency and accuracy. Intuitive controls and a user-friendly interface enhance ease of operation, enabling users to set up and monitor sieving processes with confidence. The SSI-161 is designed to accommodate a wide range of sample volumes and types, offering versatility for various laboratory and industrial applications. Whether performing quality control analysis in pharmaceuticals, food processing, or environmental testing, the sieve shaker provides flexibility to meet diverse application needs. Safety features such as protective enclosures and safety interlocks are integrated into the SSI-161 to ensure operator safety during operation. These features help prevent accidental exposure to moving parts and ensure safe handling of samples and equipment. Compliance with international standards and regulations is a priority for the SSI-161, ensuring the accuracy, reliability, and safety of particle size analysis in laboratory and industrial environments. Rigorous quality control measures and testing procedures ensure that the sieve shaker meets the highest standards of performance and reliability.

Phase : Single

Voltage : 230 V AC

Diameter : 8 inch

Model No : SSI-161

Capacity : 7 Sieve

Type of Product : Yoder Type Wet Sieve Shaker

Motor Power (HP) : 1/4 HP

Motor Type : Yoder

Tank Material : Galvanized Iron

Explore other Variants (3)

Ships within 15 days

U-Tech Table Top Sieve Shaker for Laboratories SSI-157

By U-Tech

₹90,859 - ₹1,41,599

The U-Tech Table Top Sieve Shaker SSI-157 is a compact and efficient instrument designed for particle size analysis in laboratory settings. Engineered with precision and equipped with advanced features, the SSI-158 provides researchers, quality control professionals, and industrial users with a reliable solution for sieving operations. At its core, the SSI-158 features a sturdy and durable construction, ensuring longevity and reliability in laboratory environments. The table-top design makes it space-efficient and easy to integrate into existing laboratory setups, while still providing powerful sieving capabilities. The SSI-158 is equipped with a high-quality motor and precision-engineered sieving mechanism, allowing for efficient and consistent particle separation. The motor provides reliable agitation to the sieve stack, facilitating the passage of particles through the sieve mesh while retaining oversize particles for accurate particle size analysis. The sieve shaker is compatible with a wide range of sieve sizes and types, allowing users to customize the sieving setup according to their specific application requirements. Interchangeable sieve decks and mesh sizes offer flexibility for analyzing various materials and particle size distributions. Advanced control features enable users to adjust the sieving parameters, including vibration intensity and duration, to optimize sieving efficiency and accuracy. Intuitive controls and a user-friendly interface enhance ease of operation, allowing users to set up and monitor sieving processes with confidence. The compact size and portability of the SSI-158 make it suitable for use in various laboratory settings, including research laboratories, educational institutions, and quality control laboratories. Its versatility and reliability make it ideal for analyzing a wide range of materials, including aggregates, soils, powders, and granular samples. Safety features such as protective enclosures and safety interlocks are integrated into the SSI-158 to ensure operator safety during operation. These features help prevent accidental exposure to moving parts and ensure safe handling of samples and equipment. Compliance with international standards and regulations is a priority for the SSI-158, ensuring the accuracy, reliability, and safety of particle size analysis in laboratory environments. Rigorous quality control measures and testing procedures ensure that the sieve shaker meets the highest standards of performance and reliability.

Diameter : 47 mm

Model No : SSI-157

Material : Stainless Steel

Type of Product : Table Top Sieve Shaker

Application Area : Laboratories

Filtration Area : 12.5 cm

Holding Capacity : 250 ml

Grade : SS 316

Explore other Variants (2)

Ships within 15 days

U-Tech SS Ice Flaking Machine with Air Cooled Automatic Control Device SSI-201

By U-Tech

₹4,49,299 - ₹5,13,485

U-Tech IF-70 61 Kg SS Ice Flaking Machine with Air Cooled Automatic Control Device SSI-201 is a specialized piece of equipment used to produce flake ice. Flake ice consists of small, flat, and thin ice flakes that have a high surface area-to-volume ratio. This makes it ideal for a wide range of applications such as food storage, cooling, and processing in industries such as fisheries, food and beverage, healthcare, and chemical.
The ice flaking machine operates by spraying a thin layer of water onto a cold refrigerated drum or evaporator. The drum's surface temperature is typically set below freezing point, causing the water to freeze rapidly upon contact and form a thin layer of ice. As the drum rotates, a scraping mechanism or knife gently removes the ice layer in the form of flakes, which are then collected and stored in an insulated storage bin.
The size and thickness of the ice flakes produced by the machine can be adjusted based on the application requirements. Flake ice typically ranges in thickness from 1.5 to 2.5 mm, allowing it to easily conform to the shape of products or containers it comes into contact with.
The advantages of using an ice flaking machine include its high cooling efficiency, rapid ice production, and versatility. Flake ice has excellent heat transfer properties, which allows for efficient cooling and preservation of perishable products. The rapid ice production rate of the machine ensures a continuous supply of ice, meeting the demands of various industries. Additionally, the versatility of flake ice makes it suitable for a wide range of applications, such as seafood preservation, concrete cooling, medical applications, and food displays.
Ice flaking machines often include features to enhance their performance and user convenience. These may include automatic ice level sensors, adjustable ice thickness controls, water level controls, and self-cleaning functions. Some machines are designed with energy-saving features, such as improved insulation and advanced refrigeration systems, to reduce energy consumption and operating costs.
Proper maintenance and cleaning of the ice flaking machine are crucial to ensure its optimal performance and longevity. Regular cleaning and sanitization of the water system, evaporator, and storage bin help prevent bacterial growth and maintain hygienic ice production. Routine inspection and maintenance of the refrigeration system, electrical components, and moving parts are also important to identify and address any potential issues.
In summary, an ice flaking machine is a specialized equipment used to produce flake ice. It operates by spraying water onto a cold drum, which freezes the water into thin ice layers. The ice layers are then scraped off in the form of flakes. The machine offers advantages such as high cooling efficiency, rapid ice production, and versatility for various applications. Proper maintenance and cleaning are important to ensure the machine's performance and hygiene. Ice flaking machines are widely used in industries requiring ice for cooling, preservation, and processing purposes.

Type of Product : Ice Flaking Machine

Material : Stainless Steel

Temperature : Water: 10°C

Model No : SSI-201

Application Area : Laboratories

Noise Level : < 50 dB

Refrigerant Gas : R404a

Ambient Temperature : 10°C

Control Mode : Electromechanical

Explore other Variants (2)

Ships within 10 days

U-Tech 4 x 2 x 2 ft Wooden Body Fume Hood for Laboratories SSI-128

By U-Tech

₹2,83,199  

U-Tech 4 x 2 x 2 ft Wooden Body Fume Hood for Laboratories SSI-128 is a safety device commonly used in laboratories and other workspaces to protect workers from hazardous fumes, gases, vapors, and airborne particles. It is designed to capture and contain these substances, preventing their release into the surrounding environment and minimizing the risk of exposure.
The primary function of a fume hood is to provide a controlled workspace where potentially dangerous materials can be handled safely. It consists of an enclosed chamber with a movable sash or front opening that allows access to the workspace. The interior of the fume hood is lined with chemically resistant materials to withstand corrosive substances.
A fume hood operates based on the principle of containment. When in use, it creates a negative pressure zone within the hood, drawing air and any airborne contaminants into the hood and away from the user. The fumes are then exhausted through a ventilation system, typically connected to a fume duct, which carries the contaminants to an appropriate exhaust system or treatment.
Fume hoods are equipped with various safety features to ensure proper operation and protection. These include a sash or window that can be adjusted to control the airflow, baffles or slots at the back of the hood to maintain proper air distribution, and airflow monitors to indicate the hood's performance.
Different types of fume hoods are available to suit specific applications and requirements. These include ducted fume hoods, which are connected to an external exhaust system, and ductless fume hoods, which use filters to remove and neutralize contaminants before recirculating the air. There are also specialized hoods, such as radioisotope hoods and perchloric acid hoods, designed for specific hazardous materials.
Proper use and maintenance of fume hoods are crucial for their effective operation. Users must position themselves correctly within the hood to ensure optimal airflow and containment. Regular inspections, testing, and certification are necessary to verify that the hood meets safety standards and is functioning correctly.
Fume hoods are essential safety devices in laboratories, research facilities, and industrial settings where hazardous materials are handled. They provide a critical barrier between workers and potentially harmful substances, minimizing the risk of exposure and promoting a safe working environment.
In summary, a fume hood is a safety device used to protect workers from hazardous fumes, gases, and vapors. It creates a controlled workspace by capturing and containing these substances, preventing their release into the surrounding environment. Fume hoods are equipped with safety features and ventilation systems to ensure proper airflow and exhaust. They are crucial in maintaining a safe working environment in laboratories and other workplaces where hazardous materials are handled.

Add to Cart Buy Now

Ships within 15 days

U-Tech Vacuum Pump for Rotary Vacuum Evaporator for Laboratories SSI-140

By U-Tech

₹50,739  

The U-Tech Vacuum Pump is a specialized pump designed for use with the Rotary Vacuum Evaporator model SSI-140 in laboratory settings. It plays a crucial role in creating and maintaining the required vacuum level within the evaporator system, enabling efficient and controlled evaporation processes. The U-Tech Vacuum Pump offers several key features and benefits:
Vacuum Generation: The primary function of the U-Tech Vacuum Pump is to generate a vacuum within the Rotary Vacuum Evaporator. It creates a low-pressure environment by removing air and other gases from the system, allowing for faster and more effective evaporation of the solvent.
Strong Vacuum Power: The U-Tech Vacuum Pump is equipped with a high-performance motor and robust internal components, providing strong vacuum power. It is capable of achieving and maintaining the necessary vacuum levels required for the evaporation process, ensuring optimal performance and efficiency.
Reliable and Quiet Operation: The vacuum pump is designed for reliable and quiet operation, minimizing noise and vibrations in the laboratory environment. This ensures a comfortable and productive workspace, without compromising the performance of the evaporation system.
Chemical Resistance: The U-Tech Vacuum Pump is constructed using materials that are resistant to corrosive chemicals and solvents commonly used in laboratory applications. This ensures that the pump remains durable and functional even when exposed to potentially damaging substances.
Safety Features: The vacuum pump is equipped with safety features that protect both the pump itself and the evaporator system. These may include thermal protection mechanisms to prevent overheating, pressure relief valves to prevent excessive pressure buildup, and built-in filters to trap contaminants and protect the pump from damage.
Easy Maintenance: The U-Tech Vacuum Pump is designed for easy maintenance and servicing. It may have accessible ports for oil changes, filters that can be replaced or cleaned, and other user-friendly features that simplify routine maintenance tasks.
When using the U-Tech Vacuum Pump with the SSI-140 Rotary Vacuum Evaporator, it is important to follow the manufacturer's instructions for proper installation, operation, and maintenance. Regular maintenance, including checking oil levels, cleaning or replacing filters, and ensuring proper connections, will help optimize the performance and longevity of the pump.
Overall, the U-Tech Vacuum Pump is a reliable and essential component for the Rotary Vacuum Evaporator SSI-140. Its strong vacuum power, chemical resistance, and safety features contribute to efficient and controlled evaporation processes in laboratory settings.

Add to Cart Buy Now

Ships within 15 days

U-Tech 4kVA Triple Relay Automatic Stabilizer for Deep Freezer SSI-120

By U-Tech

₹22,419  

U-Tech 4kVA Triple Relay Automatic Stabilizer for Deep Freezer SSI-120 refers to a fiscal or economic policy feature that helps stabilize an economy without requiring explicit, discretionary intervention from policymakers. It is designed to automatically mitigate the impact of economic fluctuations and stabilize aggregate demand during periods of expansion or contraction.
One example of an automatic stabilizer is the progressive income tax system. In times of economic growth, individuals and businesses earn higher incomes, leading to an increase in tax revenues. As a result, the government's tax revenue automatically rises, helping to reduce the fiscal deficit or even generate a surplus. This helps to moderate the pace of economic expansion and prevent overheating.
Conversely, during economic downturns, when incomes decline, individuals and businesses pay lower taxes, reducing their tax burden. This increase in disposable income allows households and firms to maintain a certain level of consumption and investment, thereby cushioning the impact of the economic downturn.
Another example of an automatic stabilizer is the unemployment insurance system. During economic contractions, the number of unemployed individuals tends to rise. Unemployment insurance provides temporary financial assistance to those who have lost their jobs. This helps support individuals and their families during difficult times, maintaining a basic level of consumption and reducing the severity of the economic downturn.
Automatic stabilizers have several advantages. First, they operate without the need for discretionary action, which can be time-consuming and subject to political constraints. Second, they are countercyclical in nature, meaning they automatically respond to changes in the business cycle, helping to stabilize economic activity. Third, they provide a degree of certainty and predictability to households and businesses, as they know that certain measures are in place to support them during economic downturns.
In summary, automatic stabilizers are built-in features of fiscal and economic policies that help stabilize an economy by automatically adjusting tax revenues, government spending, and social welfare programs in response to economic fluctuations. They play a crucial role in smoothing the business cycle, reducing volatility, and providing support to individuals and businesses during challenging economic times.

Add to Cart Buy Now

Ships within 15 days

U-Tech Self Standing De Humidifier for Laboratories SSI-121

By U-Tech

₹23,599 - ₹2,24,199

The U-Tech Self Standing Dehumidifier for Laboratories SSI-121 is a specialized device designed to maintain optimal humidity levels in laboratory environments. With its self-standing design, this dehumidifier offers convenient placement and operation in a variety of laboratory settings. This dehumidifier is equipped with advanced technology to effectively remove excess moisture from the air, helping to prevent condensation, mold growth, and degradation of sensitive laboratory equipment and materials. By regulating humidity levels, it helps to create a stable and controlled environment conducive to accurate experimental results and sample integrity. The U-Tech SSI-121 dehumidifier is specifically tailored for laboratory use, with features such as quiet operation and energy efficiency to minimize disruptions and operational costs. Its compact design ensures efficient use of space in laboratory settings, while its durable construction ensures long-lasting performance even in demanding environments. With its self-standing configuration, this dehumidifier can be easily positioned in laboratories without the need for additional support or installation. Its user-friendly controls allow for intuitive operation and adjustment of humidity settings to suit specific laboratory requirements. Overall, the U-Tech Self Standing Dehumidifier for Laboratories SSI-121 provides an effective solution for maintaining optimal humidity levels in laboratory environments, ensuring the integrity of experiments, equipment, and samples. Its reliability, convenience, and performance make it an essential asset for any laboratory seeking to control moisture levels and maintain experimental precision.

Voltage : 220-230 V AC

Application Area : Laboratories

Explore other Variants (4)

Ships within 15 days

U-Tech Automatic German Timer for SS Aerosol Disinfector SSI-168

By U-Tech

₹4,719  

The U-Tech Automatic German Timer is an accessory designed for use with the SS Aerosol Disinfector SSI-168. It is a specialized timer that allows users to set and control the operating duration of the aerosol disinfector, ensuring precise and automated disinfection cycles.
The SS Aerosol Disinfector SSI-168 is a device used for disinfecting or sanitizing enclosed spaces or surfaces by releasing a fine aerosol mist containing a disinfectant agent. It is commonly employed in various settings, including hospitals, laboratories, pharmaceutical facilities, and other environments where effective disinfection is crucial.
The U-Tech Automatic German Timer, when used with the SS Aerosol Disinfector SSI-168, provides a convenient and reliable way to set the duration of the disinfection cycle. It typically allows users to select the desired operating time, often displayed on a digital or analog interface.
Once the timer is set, it initiates the aerosol disinfector to release the disinfectant mist for the selected time period. After the set time has elapsed, the timer automatically shuts off the aerosol disinfector, indicating the completion of the disinfection cycle.
The U-Tech Automatic German Timer enhances the functionality of the SS Aerosol Disinfector SSI-168 by providing an automated and controlled disinfection process. It eliminates the need for manual monitoring and timing, ensuring consistent and accurate disinfection cycles.
It is important to refer to the specific product documentation and manufacturer guidelines for detailed information on the U-Tech Automatic German Timer and its operation with the SS Aerosol Disinfector SSI-168. The manufacturer's instructions will provide specific instructions on how to properly connect and utilize the timer with the aerosol disinfector.
By incorporating the U-Tech Automatic German Timer into the SS Aerosol Disinfector SSI-168 setup, users can achieve precise and automated disinfection cycles. This contributes to the efficiency, effectiveness, and convenience of the disinfection process, ensuring the targeted spaces or surfaces are thoroughly sanitized according to specific time requirements.

Add to Cart Buy Now

Ships within 15 days

U-Tech 0 to 60 minutes Automatic German Timer for 5L Stainless Steel Humidifier SSI-169

By U-Tech

₹4,719  

The U-Tech 0 to 60 minutes Automatic German Timer is a specialized timer designed for use with the 5L Stainless Steel Humidifier SSI-169. It is a convenient and precise timing device that allows users to set and control the operating duration of the humidifier.
Humidifiers, such as the SSI-169, are used to increase the moisture levels in a specific environment. They are commonly used in various settings, including homes, offices, and laboratories, to improve air quality and maintain optimal humidity levels for comfort or specific applications.
The U-Tech Automatic German Timer provides a time setting range from 0 to 60 minutes, allowing users to select the desired operating duration for the humidifier. This feature enables automated control of the humidifier's operation without the need for manual monitoring or intervention.
The timer is designed to be user-friendly, typically incorporating a dial or digital interface for setting the desired time duration. Once the timer is set, it will initiate the operation of the humidifier for the selected time period and automatically shut off once the set time has elapsed.
The U-Tech Automatic German Timer enhances the functionality and convenience of the 5L Stainless Steel Humidifier SSI-169 by allowing users to preselect the operating duration according to their specific needs. This can be particularly useful in situations where consistent and controlled humidity levels are desired, such as in certain laboratory experiments or in maintaining a comfortable environment for extended periods.
It's important to note that the U-Tech 0 to 60 minutes Automatic German Timer is designed specifically for use with the SSI-169 humidifier. The timer may have specific connectors or compatibility requirements that allow it to be seamlessly integrated with the humidifier's control system.
For detailed information on the U-Tech 0 to 60 minutes Automatic German Timer and its operation with the 5L Stainless Steel Humidifier SSI-169, it is recommended to consult the product documentation provided by the manufacturer or reach out to them directly. They will provide specific instructions on how to properly connect and utilize the timer with the humidifier.

Add to Cart Buy Now

Ships within 15 days

U-Tech Monoblock Vacuum Pump With Perfect Motor SSI-171

By U-Tech

₹22,419 - ₹28,319

The U-Tech Monoblock Vacuum Pump for Laboratories, SSI-171, is a high-performance and reliable vacuum pump designed specifically for laboratory applications. Renowned for its efficiency, durability, and precision, this vacuum pump is engineered to meet the demanding requirements of scientific research, analytical chemistry, and industrial processes. The monoblock design of the vacuum pump integrates all essential components into a single compact unit, maximizing space efficiency and simplifying installation and maintenance. This streamlined design ensures optimal performance and reliability while minimizing downtime and maintenance costs. Equipped with a powerful motor and precision-engineered vacuum system, the SSI-171 vacuum pump delivers consistent and reliable vacuum performance across a wide range of applications. Whether used for degassing, filtration, or vacuum distillation, this vacuum pump provides the necessary vacuum levels with precision and accuracy. The vacuum pump is designed with user convenience in mind, featuring intuitive controls and easy-to-read indicators for monitoring vacuum levels and operational status. Additionally, safety features such as overheat protection and automatic shut-off mechanisms ensure operator safety and equipment protection during operation. Constructed from high-quality materials and precision-engineered components, the U-Tech Monoblock Vacuum Pump for Laboratories, SSI-171, offers exceptional durability and longevity, even under continuous use in demanding laboratory environments. Its robust construction and reliable performance make it an indispensable tool for laboratories, research facilities, and industrial settings requiring precise and consistent vacuum capabilities.

Type of Product : Monoblock Vacuum Pump

Model No : SSI-171

Voltage : 220-230 V AC

Pump Type : Beltless

Application Area : Laboratories

Motor Type : Electric Motor

Included Components : With Perfect Motor

Explore other Variants (2)

Ships within 15 days

U-Tech Vacuum Gauge With Regulator for Rotary Vacuum Pump SSI-172

By U-Tech

₹4,129  

The U-Tech Vacuum Gauge with Regulator is a specialized instrument designed for use with the Rotary Vacuum Pump SSI-172. It combines a vacuum gauge and a regulator into a single device, providing accurate pressure measurement and control capabilities in vacuum systems.
A vacuum gauge is an instrument used to measure and display the level of vacuum within a system. It provides valuable information about the pressure conditions, allowing users to monitor and control the vacuum levels during operation. The U-Tech Vacuum Gauge is likely specifically calibrated and designed to work optimally with the SSI-172 rotary vacuum pump.
The vacuum gauge component of the U-Tech Vacuum Gauge with Regulator allows for precise and reliable pressure readings, typically displayed on a dial or digital display. It may use various measurement units, such as torr, millibar, or pascal, to indicate the pressure within the vacuum system. This information is crucial for maintaining the desired vacuum levels, ensuring process efficiency, and identifying any potential leaks or issues in the system.
The regulator component of the U-Tech Vacuum Gauge with Regulator allows for precise control of the pressure within the vacuum system. It enables users to adjust and maintain the desired pressure setpoint by regulating the flow of gas or fluid into the system. The regulator ensures stability and accuracy in maintaining the desired vacuum levels for optimal performance and reliable operation of the SSI-172 rotary vacuum pump.
The U-Tech Vacuum Gauge with Regulator is likely designed with compatibility and ease of use in mind, providing a convenient and integrated solution for pressure measurement and control in conjunction with the SSI-172 rotary vacuum pump. However, it's important to refer to the specific product documentation and manufacturer guidelines for detailed information on the U-Tech Vacuum Gauge with Regulator and its operation with the SSI-172 rotary vacuum pump.
By incorporating a vacuum gauge and regulator into a single device, the U-Tech Vacuum Gauge with Regulator offers enhanced functionality and convenience, allowing users to monitor, measure, and control the vacuum levels effectively in their vacuum systems.

Add to Cart Buy Now

Ships within 15 days

U-Tech Crompton Motor for Rotary Vacuum Pump SSI-172

By U-Tech

₹11,563  

In the context of a rotary vacuum pump like the SSI-172, the motor plays a crucial role in driving the pump's rotary mechanism. The motor provides the rotational force necessary for the vanes or blades inside the pump to create a vacuum by removing air or gas from the system.
When selecting a motor for a rotary vacuum pump, several factors need to be considered, such as power requirements, efficiency, reliability, and compatibility with the pump's specifications. The motor should be capable of delivering sufficient power and torque to ensure smooth and efficient operation of the pump.
While Crompton Motors are known for its quality, it's important to consult the specific requirements and recommendations provided by the manufacturer of the Rotary Vacuum Pump SSI-172. They would typically specify the motor requirements, including power rating, speed, and compatibility, to ensure optimal performance and longevity of the pump.
It's worth mentioning that the U-Tech branding could indicate that it is a customized or specific variant of a Crompton Motor designed to meet the requirements of U-Tech or a specific company. However, without more specific information, it is challenging to provide a detailed analysis of the U-Tech Crompton Motor for the Rotary Vacuum Pump SSI-172.

Add to Cart Buy Now

Ships within 15 days

U-Tech Double Head Beltless and Oil Free Diaphragm Type Vacuum Cum Pressure Pump SSI-173

By U-Tech

₹47,199 - ₹53,099

The U-Tech Double Head Beltless and Oil-Free Diaphragm Type Vacuum Cum Pressure Pump SSI-173 represents a significant advancement in vacuum and pressure pump technology, offering exceptional versatility, efficiency, and reliability for laboratory and industrial applications. This innovative pump is designed to meet the demanding requirements of various processes, including vacuum filtration, solvent evaporation, degassing, and pressure applications. One of the standout features of the SSI-173 pump is its double-head design, which provides enhanced performance and efficiency compared to single-head models. The dual heads work in tandem to deliver higher flow rates and faster evacuation times, making it ideal for applications requiring rapid vacuum or pressure buildup. The beltless and oil-free design of the pump eliminates the need for lubrication, reducing maintenance requirements and minimizing the risk of contamination in sensitive applications. This ensures clean and reliable operation, making it suitable for use in environments where oil-free operation is essential, such as in analytical laboratories or cleanroom facilities. The diaphragm-type mechanism further enhances reliability and durability, offering smooth and quiet operation with minimal vibration. This design feature also ensures gentle handling of sensitive samples and materials, making the pump suitable for a wide range of applications across various industries. The vacuum cum pressure capability of the pump allows for seamless transition between vacuum and pressure modes, providing versatility for different processes and applications. Whether used for creating vacuum for filtration or applying pressure for transferring liquids, the SSI-173 pump offers precise control and consistent performance. Safety features such as overheat protection and automatic shut-off mechanisms are integrated into the pump to ensure operator safety and equipment protection during operation. Additionally, the pump is designed with user-friendly controls and indicators for easy monitoring and operation.

Type of Product : Diaphragm Type Vacuum Cum Pressure Pump

Model No : SSI-173

Voltage : 220-230 V AC

Power Source : Electric Corded

Head Type : Double Head

Pump Type : Beltless and Oil Free

Application Area : Laboratories

Explore other Variants (2)

Ships within 15 days

U-Tech 0.25 HP Motor Aluminium Jar Laboratory Type Ball Mill SSI-165

By U-Tech

₹33,039 - ₹50,739

The U-Tech 0.25 HP Motor Jar Laboratory Type Ball Mill SSI-165 is a high-quality milling apparatus designed for laboratory use in various scientific and industrial applications. Featuring a 0.25 horsepower motor, this ball mill is capable of efficiently milling a wide range of materials with precision and reliability. This laboratory type ball mill is equipped with a jar, which serves as the milling container, allowing for controlled milling of samples. The jar's design ensures proper containment of materials during the milling process, preventing spillage and ensuring safety. The ball mill's motor provides sufficient power to drive the milling process, enabling the efficient grinding and mixing of materials. Its compact size and laboratory-friendly design make it suitable for use in research settings, educational institutions, and quality control laboratories. Additionally, the U-Tech SSI-165 ball mill is engineered for durability and long-term performance, ensuring consistent results over extended periods of use. Its robust construction and high-quality components contribute to its reliability and longevity. Whether used for grinding, mixing, or homogenizing samples, the U-Tech 0.25 HP Motor Jar Laboratory Type Ball Mill SSI-165 offers versatility and efficiency in laboratory milling operations. Its compact size, powerful motor, and reliable performance make it an essential tool for scientific research, material testing, and quality assurance applications.

Type of Product : Laboratory Type Ball Mill

Material : Aluminium

Model No : SSI-165

Voltage : 220 V AC

Application Area : Laboratories

Motor Power (HP) : 0.25 HP

Motor Speed : 80 rpm

Explore other Variants (3)

Ships within 15 days

U-Tech 0 to 60 minutes Automatic German Timer for Laboratory Type Ball Mill SSI-165

By U-Tech

₹3,893  

U-Tech 0 to 60 minutes Automatic German Timer for Laboratory Type Ball Mill SSI-165 would serve the purpose of controlling the grinding duration and automating the operation. It allows researchers and technicians to set a specific time interval for the ball mill to operate, ensuring consistent and reproducible grinding results.
The use of a timer with a laboratory ball mill provides several advantages. First, it allows for precise control over the grinding process by ensuring that the mill operates for the desired duration. This is particularly important in experiments or analyses where the grinding time plays a critical role in achieving specific particle size distributions or material characteristics.
Additionally, a timer enables automation of the grinding process, eliminating the need for constant manual monitoring. Researchers can set the desired grinding time and focus on other tasks, maximizing efficiency in the laboratory.
While the U-Tech 0 to 60 minutes Automatic German Timer mentioned in your query may not be an actual product, there are various timers available on the market that can be used with laboratory ball mills. These timers often feature user-friendly interfaces, allowing for easy programming and adjustment of the grinding duration.
When selecting a timer for a laboratory ball mill, it is important to consider compatibility with the specific ball mill model and the necessary electrical connections. Manufacturers of ball mills may provide recommendations or compatible timer options for their products, and consulting the user manual or reaching out to the manufacturer can provide more specific information.
In summary, the use of a timer with a laboratory ball mill allows for precise control and automation of the grinding process. While information about the specific U-Tech timer for the Laboratory Type Ball Mill SSI-165 may not be available, there are various timers on the market that can be utilized to enhance the efficiency and accuracy of laboratory ball milling operations.

Add to Cart Buy Now

Ships within 15 days

U-Tech 0 to 60 minutes Automatic German Timer for Arthur H.Thomas Type Lab Willey Grinder SSI-165

By U-Tech

₹3,893  

The U-Tech 0 to 60 minutes Automatic German Timer is a specialized timer designed for use with the Arthur H. Thomas Type Lab Willey Grinder SSI-165. This timer is specifically calibrated to provide precise and accurate timing for the grinding process performed by the Willey Grinder.
The timer features a user-friendly interface with clear markings and controls for easy operation. It has a range of 0 to 60 minutes, allowing users to set the desired grinding duration based on their specific requirements. The timer can be adjusted in one-minute increments, providing flexibility and precision in timing the grinding process.
The Automatic German Timer is an essential accessory for the Willey Grinder as it allows users to control and monitor the duration of the grinding operation. This is important for achieving consistent and reproducible results in sample preparation and analysis. By setting the appropriate grinding time, users can ensure that the material being processed in the Willey Grinder achieves the desired particle size or level of homogeneity.
The timer is designed with reliability and durability in mind, featuring high-quality components and construction. It is manufactured in Germany, known for its precision engineering and adherence to stringent quality standards. This ensures that the timer provides accurate timing over an extended period of use, contributing to the overall reliability and performance of the Willey Grinder.
To use the Automatic German Timer with the Willey Grinder SSI-165, users simply need to connect the timer to the grinder and set the desired grinding duration using the control knobs or buttons. The timer will then count down the set time and automatically stop the grinder once the designated grinding period has elapsed. This feature eliminates the need for constant monitoring of the grinding process and enhances efficiency in the laboratory.
Overall, the U-Tech 0 to 60 minutes Automatic German Timer is an important accessory for the Arthur H. Thomas Type Lab Willey Grinder SSI-165. Its precise timing capabilities and reliable performance contribute to achieving consistent and accurate results in sample grinding and preparation. With its user-friendly interface and German engineering, the timer enhances the overall functionality and convenience of using the Willey Grinder in laboratory settings.

Add to Cart Buy Now

Ships within 15 days

U-Tech Galvanized Iron Soaking Tank Bottle Washing Machine SSI-164

By U-Tech

₹62,539 - ₹69,619

U-Tech 30x20x12 inch Galvanized Iron Soaking Tank Bottle Washing Machine SSI-164 is a mechanical device used in various industries to clean and sanitize bottles prior to filling them with liquids or other substances. It is commonly employed in industries such as beverage production, pharmaceuticals, cosmetics, and food processing.
The bottle washing machine operates on the principle of using high-pressure jets of water, cleaning agents, or a combination of both to remove dirt, debris, and contaminants from the bottles' surfaces. The machine is typically equipped with a conveyor system that transports the bottles through a series of cleaning stages.
The cleaning process in a bottle washing machine usually involves multiple steps. First, the bottles are fed onto the conveyor belt and transported through a pre-rinsing stage where they are subjected to a powerful jet of water to remove any loose particles or residues. This helps in preparing the bottles for the subsequent cleaning stages.
Next, the bottles pass through a main washing section where they are subjected to a combination of high-pressure water jets, brushes, and cleaning agents. The water jets and brushes remove stubborn dirt and stains from the bottles, while the cleaning agents help dissolve and remove any organic or chemical residues that may be present.
After the main washing stage, the bottles are usually rinsed with clean water to ensure the removal of any remaining cleaning agents or particles. Some advanced bottle washing machines may also include a sanitization step, where the bottles are exposed to hot water or steam to kill bacteria, fungi, or other microorganisms.
The washed and rinsed bottles then proceed to a drying section, where they are typically subjected to forced air or heated elements to remove excess moisture. This ensures that the bottles are dry and ready for the subsequent filling process.
Bottle washing machines offer several benefits. They provide a highly efficient and automated cleaning process, allowing for a large number of bottles to be cleaned in a short period. The use of high-pressure water jets and cleaning agents ensures thorough and effective cleaning, removing contaminants and ensuring product safety. Additionally, these machines help maintain consistency in the cleaning process, reducing the risk of human error and contamination.
In conclusion, a bottle washing machine is a vital piece of equipment used in various industries to clean and sanitize bottles before filling them with products. By utilizing high-pressure water jets, brushes, and cleaning agents, these machines effectively remove dirt, debris, and contaminants from the bottles' surfaces. Their automated and efficient cleaning process ensures product safety and maintains cleanliness standards in industries that rely on bottle packaging.

Type of Product : Bottle Washing Machine

Material : Galvanized Iron

Model No : SSI-164

Power Source : Electric Corded

Motor Type : Electrical

Application Area : Laboratories

Brush Material : Nylon

Explore other Variants (2)

Ships within 15 days

U-Tech Stainless Steel Soaking Tank Bottle Washing Machine SSI-164

By U-Tech

₹90,859 - ₹1,05,019

U-Tech 30x20x18 inch Stainless Steel Soaking Tank Bottle Washing Machine SSI-164 is a mechanical device used in various industries to clean and sanitize bottles prior to filling them with liquids or other substances. It is commonly employed in industries such as beverage production, pharmaceuticals, cosmetics, and food processing.
The bottle washing machine operates on the principle of using high-pressure jets of water, cleaning agents, or a combination of both to remove dirt, debris, and contaminants from the bottles' surfaces. The machine is typically equipped with a conveyor system that transports the bottles through a series of cleaning stages.
The cleaning process in a bottle washing machine usually involves multiple steps. First, the bottles are fed onto the conveyor belt and transported through a pre-rinsing stage where they are subjected to a powerful jet of water to remove any loose particles or residues. This helps in preparing the bottles for the subsequent cleaning stages.
Next, the bottles pass through a main washing section where they are subjected to a combination of high-pressure water jets, brushes, and cleaning agents. The water jets and brushes remove stubborn dirt and stains from the bottles, while the cleaning agents help dissolve and remove any organic or chemical residues that may be present.
After the main washing stage, the bottles are usually rinsed with clean water to ensure the removal of any remaining cleaning agents or particles. Some advanced bottle washing machines may also include a sanitization step, where the bottles are exposed to hot water or steam to kill bacteria, fungi, or other microorganisms.
The washed and rinsed bottles then proceed to a drying section, where they are typically subjected to forced air or heated elements to remove excess moisture. This ensures that the bottles are dry and ready for the subsequent filling process.
Bottle washing machines offer several benefits. They provide a highly efficient and automated cleaning process, allowing for a large number of bottles to be cleaned in a short period. The use of high-pressure water jets and cleaning agents ensures thorough and effective cleaning, removing contaminants and ensuring product safety. Additionally, these machines help maintain consistency in the cleaning process, reducing the risk of human error and contamination.
In conclusion, a bottle washing machine is a vital piece of equipment used in various industries to clean and sanitize bottles before filling them with products. By utilizing high-pressure water jets, brushes, and cleaning agents, these machines effectively remove dirt, debris, and contaminants from the bottles' surfaces. Their automated and efficient cleaning process ensures product safety and maintains cleanliness standards in industries that rely on bottle packaging.

Type of Product : Bottle Washing Machine

Material : Stainless Steel

Model No : SSI-164

Power Source : Electric Corded

Motor Type : Electrical

Application Area : Laboratories

Brush Material : Nylon

Explore other Variants (2)

Previous Next

Page 1 of 8 results