Have a question? Call us now at +91 9650660070

care@industrybuying.com

Salzer Relay

Showing 40 out of 58 products

Sort by

Ships within 24 hrs

Salzer 2 Pole 8 Pin AC Relay

By Salzer

₹211 - ₹388

You save ₹31!

12.81% OFF

Salzer 2 Pole 8 Pin AC Relay These products are rated for use in harsh environments and are backed. The relay socket with mounting type DIN rail. It has a user replaceable terminal block that can be relocated, allowing you to save space when installing multiple sockets. This socket has an input voltage rating of 220V and an output voltage rating of 12Vdc at 5A maximum load current. The output voltage can be adjusted by using the potentiometer on the back panel or by using an external resistor. These three different types of sockets all have similar specifications as the MK08C but they have different internal components. They all have input voltages ranging from 110V to 240Vac, 50Hz/60Hz, 1 phase or 3 phase operation, 10W maximum power consumption, and minimum dielectric strength of 500Vac/1min (between terminals).

Type of Product : Relay

No. of Pole : 2

Pins : 8 Pin

Power Source : AC

Ships within 24 hrs

Salzer 4 Pole 14 Pin AC Relay

By Salzer

₹258 - ₹424

Salzer 4 Pole 14 Pin AC Relay These products are rated for use in harsh environments and are backed. The relay socket with mounting type DIN rail. It has a user replaceable terminal block that can be relocated, allowing you to save space when installing multiple sockets. This socket has an input voltage rating of 220V and an output voltage rating of 12Vdc at 5A maximum load current. The output voltage can be adjusted by using the potentiometer on the back panel or by using an external resistor. These three different types of sockets all have similar specifications as the MK08C but they have different internal components. They all have input voltages ranging from 110V to 240Vac, 50Hz/60Hz, 1 phase or 3 phase operation, 10W maximum power consumption, and minimum dielectric strength of 500Vac/1min (between terminals).

Type of Product : Relay

No. of Pole : 4

Pins : 14 Pin

Power Source : AC

Ships within 24 hrs

Salzer 4 Pole 14 Pin DC Relay

By Salzer

₹223 - ₹282

Salzer 4 Pole 14 Pin DC Relay These products are rated for use in harsh environments and are backed. The relay socket with mounting type DIN rail. It has a user replaceable terminal block that can be relocated, allowing you to save space when installing multiple sockets. This socket has an input voltage rating of 220V and an output voltage rating of 12Vdc at 5A maximum load current. The output voltage can be adjusted by using the potentiometer on the back panel or by using an external resistor. These three different types of sockets all have similar specifications as the MK08C but they have different internal components. They all have input voltages ranging from 110V to 240Vac, 50Hz/60Hz, 1 phase or 3 phase operation, 10W maximum power consumption, and minimum dielectric strength of 500Vac/1min (between terminals).

Type of Product : Relay

No. of Pole : 4

Pins : 14 Pin

Power Source : DC

Ships within 24 hrs

Salzer 2 Pole 8 Pin DC Glass Relay

By Salzer

₹329 - ₹365

Salzer 2 Pole 8 Pin DC Glass Relay These products are rated for use in harsh environments and are backed. The relay socket with mounting type DIN rail. It has a user replaceable terminal block that can be relocated, allowing you to save space when installing multiple sockets. This socket has an input voltage rating of 220V and an output voltage rating of 12Vdc at 5A maximum load current. The output voltage can be adjusted by using the potentiometer on the back panel or by using an external resistor. These three different types of sockets all have similar specifications as the MK08C but they have different internal components. They all have input voltages ranging from 110V to 240Vac, 50Hz/60Hz, 1 phase or 3 phase operation, 10W maximum power consumption, and minimum dielectric strength of 500Vac/1min (between terminals).

Type of Product : Glass Relay

No. of Pole : 2

Pins : 8 Pin

Power Source : DC

Related Searches

salzer ac relay

salzer relay parts and accessories

salzer power relay

salzer dc relay

Ships within 24 hrs

Salzer 2 Pole 8 Pin DC Relay

By Salzer

₹199 - ₹306

You save ₹10!

4.79% OFF

Salzer 2 Pole 8 Pin DC Relay These products are rated for use in harsh environments and are backed. The relay socket with mounting type DIN rail. It has a user replaceable terminal block that can be relocated, allowing you to save space when installing multiple sockets. This socket has an input voltage rating of 220V and an output voltage rating of 12Vdc at 5A maximum load current. The output voltage can be adjusted by using the potentiometer on the back panel or by using an external resistor. These three different types of sockets all have similar specifications as the MK08C but they have different internal components. They all have input voltages ranging from 110V to 240Vac, 50Hz/60Hz, 1 phase or 3 phase operation, 10W maximum power consumption, and minimum dielectric strength of 500Vac/1min (between terminals).

Type of Product : Relay

No. of Pole : 2

Pins : 8 Pin

Power Source : DC

Ships within 24 hrs

Salzer 5A Relay Socket 220 V

By Salzer

₹81 - ₹98

Salzer 5A Relay Socket 220 V These products are rated for use in harsh environments and are backed. The relay socket with mounting type DIN rail. It has a user replaceable terminal block that can be relocated, allowing you to save space when installing multiple sockets. This socket has an input voltage rating of 220V and an output voltage rating of 12Vdc at 5A maximum load current. The output voltage can be adjusted by using the potentiometer on the back panel or by using an external resistor. These three different types of sockets all have similar specifications as the MK08C but they have different internal components. They all have input voltages ranging from 110V to 240Vac, 50Hz/60Hz, 1 phase or 3 phase operation, 10W maximum power consumption, and minimum dielectric strength of 500Vac/1min (between terminals).

Type of Product : Relay Socket

Voltage : 220 V

Ships within 24 hrs

Salzer 3 Pole 11 Pin DC Glass Relay

By Salzer

₹294 - ₹494

Salzer 3 Pole 11 Pin DC Glass Relay These products are rated for use in harsh environments and are backed. The relay socket with mounting type DIN rail. It has a user replaceable terminal block that can be relocated, allowing you to save space when installing multiple sockets. This socket has an input voltage rating of 220V and an output voltage rating of 12Vdc at 5A maximum load current. The output voltage can be adjusted by using the potentiometer on the back panel or by using an external resistor. These three different types of sockets all have similar specifications as the MK08C but they have different internal components. They all have input voltages ranging from 110V to 240Vac, 50Hz/60Hz, 1 phase or 3 phase operation, 10W maximum power consumption, and minimum dielectric strength of 500Vac/1min (between terminals).

Type of Product : Glass Relay

No. of Pole : 3

Pins : 11 Pin

Power Source : DC

Salzer Glass Relay 5A 8Pin 240V MKG2P240A

Ships within 24 hrs

Salzer 2 Pole 8 Pin AC Glass Relay

By Salzer

₹365 - ₹483

You save ₹27!

6.89% OFF

Salzer 2 Pole 8 Pin AC Glass Relay These products are rated for use in harsh environments and are backed. The relay socket with mounting type DIN rail. It has a user replaceable terminal block that can be relocated, allowing you to save space when installing multiple sockets. This socket has an input voltage rating of 220V and an output voltage rating of 12Vdc at 5A maximum load current. The output voltage can be adjusted by using the potentiometer on the back panel or by using an external resistor. These three different types of sockets all have similar specifications as the MK08C but they have different internal components. They all have input voltages ranging from 110V to 240Vac, 50Hz/60Hz, 1 phase or 3 phase operation, 10W maximum power consumption, and minimum dielectric strength of 500Vac/1min (between terminals).

Type of Product : Glass Relay

No. of Pole : 2

Pins : 8 Pin

Power Source : AC

Salzer Closed Terminal Relay Socket for MSP 8 Pin MSP 08C

Ships within 24 hrs

Salzer Relay Socket MSP Series

By Salzer

₹104 - ₹211

Salzer Relay Socket MSP Series These products are rated for use in harsh environments and are backed. The relay socket with mounting type DIN rail. It has a user replaceable terminal block that can be relocated, allowing you to save space when installing multiple sockets. This socket has an input voltage rating of 220V and an output voltage rating of 12Vdc at 5A maximum load current. The output voltage can be adjusted by using the potentiometer on the back panel or by using an external resistor. These three different types of sockets all have similar specifications as the MK08C but they have different internal components. They all have input voltages ranging from 110V to 240Vac, 50Hz/60Hz, 1 phase or 3 phase operation, 10W maximum power consumption, and minimum dielectric strength of 500Vac/1min (between terminals).

Type of Product : Relay Socket

Voltage : 220 V

Salzer 240 V AC 1 Pole Power Relay, PRC 40 1P 240A (Pack of 4)

Ships within 24 hrs

Salzer 1 Pole 40 A Power Relay PRC Series

By Salzer

₹1,769 - ₹2,359

Salzer 1 Pole 40 A Power Relay PRC PRC Series is a robust and versatile power relay designed for various electrical applications. This particular relay operates at and is available in a convenient pack of 4, making it an excellent choice for a wide range of power control and switching needs. Key Features: Versatile Power Relay is designed to handle a variety of power control applications. It serves as an electrical switch capable of controlling high-voltage and high-current circuits using a low-voltage control signal. This makes it suitable for a broad range of industries and uses. which is a commonly used voltage level in many electrical and electronic systems. It is ideal for applications where a lower DC voltage is required for power switching. Sturdy Construction: Salzer is a well-respected brand known for producing high-quality and reliable electrical components. relay maintains this reputation with its durable construction, ensuring it can withstand the demands of various industrial and commercial applications. Convenient Packaging: The pack of 4 relays offers both cost-effectiveness and practicality. It's suitable for projects that require multiple relays, providing you with the flexibility and redundancy you need.

No. of Pole : 1 Pole

Insulation Resistance : 500 MΩ

Type of Product : Power Relay PRC

Current Rating : 40 A

Series : PRC SERIES

Salzer Relay M SERIES - MKG 220V DC 5A 2 Pole, MKG 2P 220 (Pack of 10)

Ships within 24 hrs

Salzer 2 Pole PCB mounted DC Relay M SERIES - MKG (Pack of 10)

By Salzer

Pack of 10 piece

₹3,303 - ₹5,073

Salzer 2 Pole PCB mounted DC Relay M SERIES - MKG (Pack of 10) is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : DC Relay

Color : Transparent

No. of Pole : 2 Pole

Series : M SERIES - MKG

Salzer 12 V DC 1 Pole Power Relay, PRC 80 1P 12 (Pack of 3)

Ships within 24 hrs

Salzer 1 Pole 80 A Power Relay PRC Series

By Salzer

₹1,769 - ₹2,713

Salzer 1 Pole 80 A Power Relay PRC PRC Series is a robust and versatile power relay designed for various electrical applications. This particular relay operates at and is available in a convenient pack of 4, making it an excellent choice for a wide range of power control and switching needs. Key Features: Versatile Power Relay is designed to handle a variety of power control applications. It serves as an electrical switch capable of controlling high-voltage and high-current circuits using a low-voltage control signal. This makes it suitable for a broad range of industries and uses. which is a commonly used voltage level in many electrical and electronic systems. It is ideal for applications where a lower DC voltage is required for power switching. Sturdy Construction: Salzer is a well-respected brand known for producing high-quality and reliable electrical components. relay maintains this reputation with its durable construction, ensuring it can withstand the demands of various industrial and commercial applications. Convenient Packaging: The pack of 4 relays offers both cost-effectiveness and practicality. It's suitable for projects that require multiple relays, providing you with the flexibility and redundancy you need.

No. of Pole : 1 Pole

Insulation Resistance : 500 MΩ

Type of Product : Power Relay PRC

Current Rating : 80 A

Series : PRC SERIES

Salzer SM500 3 Phase & 1 Phase 1 C/O Voltage Monitoring Relay 240 VAC, MD71B9

Ships within 4 days

Salzer SM500 3 Phase & 1 Phase 1 C/O Voltage Monitoring Relay 240 VAC

By Salzer

₹1,533 - ₹1,533

You save ₹22!

1.42% OFF

The Salzer SM500 Voltage Monitoring Relay is a versatile device designed to protect both single-phase and three-phase systems from voltage anomalies. Operating at 240 VAC, it continuously monitors for phase loss, phase reversal, and voltage imbalances, ensuring the safety and stability of your electrical equipment. Its 1 C/O (Changeover) contact configuration allows flexible integration into various control circuits. This relay features adjustable voltage settings and time delays, providing tailored protection for diverse applications. Its robust design and reliable performance make it suitable for industrial and commercial environments. Whether safeguarding motors, generators, or sensitive equipment, the Salzer SM500 enhances system reliability and minimizes downtime, offering a dependable solution for power management.

Type of Product : Voltage Monitoring Relay

Phase : 3 Phase & 1 Phase

Voltage : 240 VAC

Series : SM500

Monitoring : Selectable Under Voltage + Selectable Over Voltage

Wire : 4

Contact Arrangement : 1 C/O

Salzer RMS041P24 Relay Module 1 Changeover 24V DC Suitable for OMRON, Green

Ships within 8 days

Salzer 4 Channel 1 Changeover Relay Module

By Salzer

₹1,014 - ₹2,595

Salzer 2 Channel 1 Changeover Relay Module is a versatile and reliable electronic device designed to enhance the functionality of your electrical or control systems. This specific model features a relay, making it suitable for a wide range of applications. Operating at a voltage, it is engineered to work seamlessly with OMRON relays, ensuring compatibility and efficient performance. The vibrant green color of the card makes it easily identifiable in your setup, adding to its user-friendliness. Relay cards like the Salzer play a critical role in controlling and automating various processes. They serve as an interface between low-voltage control signals and high-power devices, allowing you to switch electrical circuits on and off with precision. This type of relay card is particularly useful in industrial automation, home automation, and control systems, where reliable and safe operation is paramount. The configuration signifies that this relay card provides one normally open (NO) and one normally closed (NC) contact. This flexibility allows you to adapt the card to your specific needs, whether you're controlling motors, lights, valves, or any other electrical components. The operating voltage is common in many industrial and control systems, offering a balance between efficiency and safety. It ensures that the card can handle a variety of control signals while remaining energy-efficient.

Type of Product : Relay Module

No. of Channels : 4

Color : Green

Changeover : 1 Changeover

Salzer 24 V DC 1 Pole Power Relay, PRC 100 1P 24 (Pack of 3)

Ships within 7 days

Salzer 1 Pole 100 A Power Relay PRC Series

By Salzer

₹2,713 - ₹3,067

Salzer 1 Pole 100 A Power Relay PRC PRC Series is a robust and versatile power relay designed for various electrical applications. This particular relay operates at and is available in a convenient pack of 4, making it an excellent choice for a wide range of power control and switching needs. Key Features: Versatile Power Relay is designed to handle a variety of power control applications. It serves as an electrical switch capable of controlling high-voltage and high-current circuits using a low-voltage control signal. This makes it suitable for a broad range of industries and uses. which is a commonly used voltage level in many electrical and electronic systems. It is ideal for applications where a lower DC voltage is required for power switching. Sturdy Construction: Salzer is a well-respected brand known for producing high-quality and reliable electrical components. relay maintains this reputation with its durable construction, ensuring it can withstand the demands of various industrial and commercial applications. Convenient Packaging: The pack of 4 relays offers both cost-effectiveness and practicality. It's suitable for projects that require multiple relays, providing you with the flexibility and redundancy you need.

No. of Pole : 1 Pole

Insulation Resistance : 500 MΩ

Type of Product : Power Relay PRC

Current Rating : 100 A

Series : PRC SERIES

Salzer RMS081P24 Relay Module 1 Changeover 24V DC Suitable for OMRON, Green

Ships within 8 days

Salzer 8 Channel 1 Changeover Relay Module

By Salzer

₹2,005 - ₹4,365

Type of Product : Relay Module

No. of Channels : 8

Color : Green

Changeover : 1 Changeover

Salzer 240 V AC 3 Pole Power Relay, PRC 30 3P 240A (Pack of 4)

Ships within 8 days

Salzer 3 Pole 30 A Power Relay PRC Series

By Salzer

₹3,303 - ₹3,657

Salzer 3 Pole 30 A Power Relay PRC PRC Series is a robust and versatile power relay designed for various electrical applications. This particular relay operates at and is available in a convenient pack of 4, making it an excellent choice for a wide range of power control and switching needs. Key Features: Versatile Power Relay is designed to handle a variety of power control applications. It serves as an electrical switch capable of controlling high-voltage and high-current circuits using a low-voltage control signal. This makes it suitable for a broad range of industries and uses. which is a commonly used voltage level in many electrical and electronic systems. It is ideal for applications where a lower DC voltage is required for power switching. Sturdy Construction: Salzer is a well-respected brand known for producing high-quality and reliable electrical components. relay maintains this reputation with its durable construction, ensuring it can withstand the demands of various industrial and commercial applications. Convenient Packaging: The pack of 4 relays offers both cost-effectiveness and practicality. It's suitable for projects that require multiple relays, providing you with the flexibility and redundancy you need.

No. of Pole : 3 Pole

Insulation Resistance : 500 MΩ

Type of Product : Power Relay PRC

Current Rating : 30 A

Series : PRC SERIES

Salzer RMS082P24 Relay Module 2 Changeover 24V DC Suitable for OMRON, Green

Ships within 8 days

Salzer 8 Channel 2 Changeover Relay Module

By Salzer

₹2,949 - ₹4,955

Type of Product : Relay Module

No. of Channels : 8

Color : Green

Changeover : 2 Changeover

Salzer Relay M SERIES - MKP 240V AC 2 Pole, MKP 2P 240A (Pack of 10)

Ships within 8 days

Salzer 2 Pole Transparent AC Relay MKP Series (Pack of 10)

By Salzer

Pack of 10 piece

₹3,775 - ₹5,781

Salzer 2 Pole Transparent AC Relay MKP Series is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : AC Relay

No. of Pole : 2 Pole

Series : MKP Series

Mounting Type : PCB mounted

Salzer 24 V DC 2 Pole Power Relay, PRC 30 2P 24 (Pack of 4)

Ships within 8 days

Salzer 2 Pole 30 A Power Relay PRC Series

By Salzer

₹2,359 - ₹2,713

Salzer 2 Pole 30 A Power Relay PRC PRC Series is a robust and versatile power relay designed for various electrical applications. This particular relay operates at and is available in a convenient pack of 4, making it an excellent choice for a wide range of power control and switching needs. Key Features: Versatile Power Relay is designed to handle a variety of power control applications. It serves as an electrical switch capable of controlling high-voltage and high-current circuits using a low-voltage control signal. This makes it suitable for a broad range of industries and uses. which is a commonly used voltage level in many electrical and electronic systems. It is ideal for applications where a lower DC voltage is required for power switching. Sturdy Construction: Salzer is a well-respected brand known for producing high-quality and reliable electrical components. relay maintains this reputation with its durable construction, ensuring it can withstand the demands of various industrial and commercial applications. Convenient Packaging: The pack of 4 relays offers both cost-effectiveness and practicality. It's suitable for projects that require multiple relays, providing you with the flexibility and redundancy you need.

No. of Pole : 2 Pole

Insulation Resistance : 500 MΩ

Type of Product : Power Relay PRC

Current Rating : 30 A

Series : PRC SERIES

Salzer Glass Relay 5A 11Pin 110V MKG3P110A

Ships within 8 days

Salzer 3 Pole 11 Pin AC Glass Relay

By Salzer

₹518 - ₹742

Salzer 3 Pole 11 Pin AC Glass Relay These products are rated for use in harsh environments and are backed. The relay socket with mounting type DIN rail. It has a user replaceable terminal block that can be relocated, allowing you to save space when installing multiple sockets. This socket has an input voltage rating of 220V and an output voltage rating of 12Vdc at 5A maximum load current. The output voltage can be adjusted by using the potentiometer on the back panel or by using an external resistor. These three different types of sockets all have similar specifications as the MK08C but they have different internal components. They all have input voltages ranging from 110V to 240Vac, 50Hz/60Hz, 1 phase or 3 phase operation, 10W maximum power consumption, and minimum dielectric strength of 500Vac/1min (between terminals).

Type of Product : Glass Relay

No. of Pole : 3

Pins : 11 Pin

Power Source : AC

Salzer Relay M SERIES - MSP 240V AC 3 Pole, MSP 3P 240A (Pack of 20)

Ships within 8 days

Salzer 3 Pole Transparent AC Relay MSP Series (Pack of 20)

By Salzer

Pack of 20 piece

₹6,607 - ₹7,197

Salzer 3 Pole Transparent AC Relay MSP Series is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : AC Relay

No. of Pole : 3 Pole

Series : MSP Series

Mounting Type : PCB mounted

Salzer Relay M SERIES - MKP 24V DC 2 Pole, MKP 2P 24 (Pack of 10)

Ships within 8 days

Salzer 2 Pole PCB mounted DC Relay M SERIES - MKP (Pack of 10)

By Salzer

Pack of 10 piece

₹3,775 - ₹7,079

Salzer 2 Pole PCB mounted DC Relay M SERIES - MKP (Pack of 10) is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : DC Relay

Color : Transparent

No. of Pole : 2 Pole

Series : M SERIES - MKP

Ships within 8 days

Salzer Glass Relay 10A 8Pin 12V MKP2P12

By Salzer

₹435

Glass relays are used in many applications. They are typically constructed with a glass envelope and five pins, but they can also come with six pins. Glass relays are offered with AC and DC coils. The latter are usually used in automotive applications. The AC ones are used as a replacement for electromechanical relays. They have a high resistance to vibrations and shocks, which makes them suitable for industrial applications. General purpose relays are ideal to use instead of mechanical relays. The relays are used to transfer electricity for high voltage or frequency applications. C & DC relays from 3 to 80 Amps from 1 to 4 pole DC power relays up to 125 Amps Miniature, General purpose, Power & Automotive Relays Termination via Solder, PCB mounted, Plug-in and Screw type terminals

Salzer Relay M SERIES - MSP 12V AC 2 Pole, MSP 2P 12A (Pack of 20)

Ships within 8 days

Salzer Relay M SERIES - MSP 12V AC 2 Pole, MSP 2P 12A (Pack of 20)

By Salzer

Pack of 20 piece

₹5,663

The Salzer M SERIES - MSP (Equivalent to MY) 12 V AC 2P Relay, MSP2P12A ,(Pack of 20) is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Salzer 24 V DC 1 Pole Power Relay, PRC 60 1P 24 (Pack of 4)

Ships within 8 days

Salzer 1 Pole 60 A Power Relay PRC Series

By Salzer

₹2,359 - ₹2,713

Salzer 1 Pole 60 A Power Relay PRC PRC Series is a robust and versatile power relay designed for various electrical applications. This particular relay operates at and is available in a convenient pack of 4, making it an excellent choice for a wide range of power control and switching needs. Key Features: Versatile Power Relay is designed to handle a variety of power control applications. It serves as an electrical switch capable of controlling high-voltage and high-current circuits using a low-voltage control signal. This makes it suitable for a broad range of industries and uses. which is a commonly used voltage level in many electrical and electronic systems. It is ideal for applications where a lower DC voltage is required for power switching. Sturdy Construction: Salzer is a well-respected brand known for producing high-quality and reliable electrical components. relay maintains this reputation with its durable construction, ensuring it can withstand the demands of various industrial and commercial applications. Convenient Packaging: The pack of 4 relays offers both cost-effectiveness and practicality. It's suitable for projects that require multiple relays, providing you with the flexibility and redundancy you need.

No. of Pole : 1 Pole

Insulation Resistance : 500 MΩ

Type of Product : Power Relay PRC

Current Rating : 60 A

Series : PRC SERIES

Salzer Relay M SERIES - MKP 110V AC 3 Pole, MKP 3P 110A (Pack of 10)

Ships within 8 days

Salzer 3 Pole Transparent AC Relay MKP Series (Pack of 10)

By Salzer

Pack of 10 piece

₹3,893 - ₹6,607

Salzer 3 Pole Transparent AC Relay MKP Series is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : AC Relay

No. of Pole : 3 Pole

Series : MKP Series

Mounting Type : PCB mounted

Salzer Relay MSP - Test Button 240V AC 7A 4 Pole, MSP4P240A07TNE (Pack of 20)

Ships within 8 days

Salzer 4 Pole Transparent AC Relay MSP - Test Button (Pack of 20)

By Salzer

Pack of 20 piece

₹7,787 - ₹8,495

Salzer 4 Pole Transparent AC Relay MSP - Test Button is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : AC Relay

No. of Pole : 4 Pole

Series : MSP - Test Button

Mounting Type : PCB mounted

Salzer Relay M SERIES - MSP 110V DC 4 Pole, MSP 4P 110 (Pack of 20)

Ships within 8 days

Salzer 4 Pole PCB mounted DC Relay M SERIES - MSP (Pack of 20)

By Salzer

Pack of 20 piece

₹5,899 - ₹5,899

Salzer 4 Pole PCB mounted DC Relay M SERIES - MSP (Pack of 20) is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : DC Relay

Color : Transparent

No. of Pole : 4 Pole

Series : M SERIES - MSP

Salzer Relay M SERIES - MSC 12V DC 5A 1 Pole, MSC 1P 12 (Pack of 10)

Ships within 7 days

Salzer 1 Pole PCB mounted DC Relay M SERIES - MSC (Pack of 10)

By Salzer

Pack of 10 piece

₹2,005 - ₹2,241

Salzer 1 Pole PCB mounted DC Relay M SERIES - MSC (Pack of 10) is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : DC Relay

Color : Transparent

No. of Pole : 1 Pole

Series : M SERIES - MSC

Salzer 12 V DC 3 Pole Miniature Relay, PCB 3P 12 (Pack of 10)

Ships within 8 days

Salzer 3 Pole 5 A Miniature Relay PCB Series

By Salzer

₹4,247 - ₹6,489

Salzer 3 Pole 5 A Miniature Relay PCB Series making it ideal for various electronics and control circuit projects. At the heart of this relay is its reliable switching mechanism. A relay, in general, serves as an electrical switch that can control high-voltage circuits with a low-voltage control signal. The configuration means that it can simultaneously control two separate circuits, making it versatile for applications that require multiple circuit control. This can be crucial in applications like industrial automation, home automation, automotive electronics, and more. its compact size and is designed to be easily mounted on , which simplifies the integration process into your electronic designs. This particular pack includes relays, which is convenient for stocking or when you need multiple relays for a project. Salzer, as a brand, is well-regarded in the electrical components industry for producing high-quality and reliable products. These miniature relays are built to meet industry standards and are backed by Salzer's reputation for quality, ensuring peace of mind when it comes to your project's reliability and safety.

No. of Pole : 3 Pole

Insulation Resistance : 500 MΩ

Type of Product : Miniature Relay

Current Rating : 5 A

Series : PCB Series

Salzer RMS021P24 Relay Module 1 Changeover 24V DC Suitable for OMRON, Green

Ships within 8 days

Salzer 2 Channel 1 Changeover Relay Module

By Salzer

₹577 - ₹1,014

Type of Product : Relay Module

No. of Channels : 2

Color : Green

Changeover : 1 Changeover

Salzer Relay M SERIES - MSP 24V DC 3 Pole, MSP 3P 24 (Pack of 20)

Ships within 8 days

Salzer 3 Pole PCB mounted DC Relay M SERIES - MSP (Pack of 20)

By Salzer

Pack of 20 piece

₹5,899 - ₹6,017

Salzer 3 Pole PCB mounted DC Relay M SERIES - MSP (Pack of 20) is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : DC Relay

Color : Transparent

No. of Pole : 3 Pole

Series : M SERIES - MSP

Salzer Relay M SERIES - MKG 24V AC 5A 3 Pole, MKG 3P 30 (Pack of 10)

Ships within 8 days

Salzer 3 Pole Transparent AC Relay MKG Series (Pack of 10)

By Salzer

Pack of 10 piece

₹3,539 - ₹4,247

Salzer 3 Pole Transparent AC Relay MKG Series is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : AC Relay

No. of Pole : 3 Pole

Series : MKG Series

Mounting Type : PCB mounted

Salzer Relay M SERIES - MSC 12V DC 5A 2 Pole, MSC 2P 12 (Pack of 10)

Ships within 8 days

Salzer 2 Pole PCB mounted DC Relay M SERIES - MSC (Pack of 10)

By Salzer

Pack of 10 piece

₹2,713 - ₹3,657

Salzer 2 Pole PCB mounted DC Relay M SERIES - MSC (Pack of 10) is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : DC Relay

Color : Transparent

No. of Pole : 2 Pole

Series : M SERIES - MSC

Salzer H Series - HSR240 V AC 2 Pole Medium Power Relays, HSR 2P 240A (Pack of 10)

Ships within 8 days

Salzer 2 Pole 16 A Medium Power Relays H Series -HSR

By Salzer

₹3,893 - ₹6,725

Salzer 2 Pole 16 A Medium Power Relays H Series -HSR are highly regarded electrical components that cater to a variety of applications demanding a dependable and efficient relay solution. Engineered to operate with a power supply, these relays are designed for medium power applications, offering exceptional versatility and performance. One key feature of the Salzer relays is their compatibility with systems, making them suitable for a broad range of electrical setups. This voltage specification is commonly found in automotive, industrial, and telecommunications applications, making these relays ideal for these sectors. The design indicates that these relays have a single-pole configuration, which simplifies their usage in applications requiring the switching of one electrical circuit. This simplicity is advantageous when medium power loads, such as lighting, heating, or motor control. These relays ensure smooth and dependable operation, reducing the risk of system failures or downtime. With Salzer's reputation for quality and durability, these relays are constructed using high-quality materials and adhere to stringent manufacturing standards. This ensures that they are built to withstand challenging operating conditions and provide a long service life.

No. of Pole : 2 Pole

Insulation Resistance : 500 MΩ

Type of Product : Medium Power Relays

Current Rating : 16 A

Series : H SERIES -HSR

Salzer H Series - HSR24 V DC 1 Pole Medium Power Relays, HSR 1P 24 (Pack of 10)

Ships within 8 days

Salzer 1 Pole 16 A Medium Power Relays H Series -HSR

By Salzer

₹2,949 - ₹3,539

Salzer 1 Pole 16 A Medium Power Relays H Series -HSR are highly regarded electrical components that cater to a variety of applications demanding a dependable and efficient relay solution. Engineered to operate with a power supply, these relays are designed for medium power applications, offering exceptional versatility and performance. One key feature of the Salzer relays is their compatibility with systems, making them suitable for a broad range of electrical setups. This voltage specification is commonly found in automotive, industrial, and telecommunications applications, making these relays ideal for these sectors. The design indicates that these relays have a single-pole configuration, which simplifies their usage in applications requiring the switching of one electrical circuit. This simplicity is advantageous when medium power loads, such as lighting, heating, or motor control. These relays ensure smooth and dependable operation, reducing the risk of system failures or downtime. With Salzer's reputation for quality and durability, these relays are constructed using high-quality materials and adhere to stringent manufacturing standards. This ensures that they are built to withstand challenging operating conditions and provide a long service life.

No. of Pole : 1 Pole

Insulation Resistance : 500 MΩ

Type of Product : Medium Power Relays

Current Rating : 16 A

Series : H SERIES -HSR

Salzer 12 V DC 2 Pole Miniature Relay, PCB 2P 12 (Pack of 10)

Ships within 8 days

Salzer 2 Pole 5 A Miniature Relay PCB Series

By Salzer

₹3,067 - ₹5,663

Salzer 2 Pole 5 A Miniature Relay PCB Series making it ideal for various electronics and control circuit projects. At the heart of this relay is its reliable switching mechanism. A relay, in general, serves as an electrical switch that can control high-voltage circuits with a low-voltage control signal. The configuration means that it can simultaneously control two separate circuits, making it versatile for applications that require multiple circuit control. This can be crucial in applications like industrial automation, home automation, automotive electronics, and more. its compact size and is designed to be easily mounted on , which simplifies the integration process into your electronic designs. This particular pack includes relays, which is convenient for stocking or when you need multiple relays for a project. Salzer, as a brand, is well-regarded in the electrical components industry for producing high-quality and reliable products. These miniature relays are built to meet industry standards and are backed by Salzer's reputation for quality, ensuring peace of mind when it comes to your project's reliability and safety.

No. of Pole : 2 Pole

Insulation Resistance : 500 MΩ

Type of Product : Miniature Relay

Current Rating : 5 A

Series : PCB Series

Salzer Relay MSP - Test Button 110V AC 12A 2 Pole, MSP2P110A12TNE (Pack of 20)

Ships within 8 days

Salzer 2 Pole Transparent AC Relay MSP - Test Button (Pack of 20)

By Salzer

Pack of 20 piece

₹6,607 - ₹7,079

Salzer 2 Pole Transparent AC Relay MSP - Test Button is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : AC Relay

No. of Pole : 2 Pole

Series : MSP - Test Button

Mounting Type : PCB mounted

Salzer Relay M SERIES - MKP 12V DC 3 Pole, MKP3P012D10TNE (Pack of 10)

Ships within 8 days

Salzer 3 Pole PCB mounted DC Relay M SERIES - MKP (Pack of 10)

By Salzer

Pack of 10 piece

₹4,483 - ₹7,905

Salzer 3 Pole PCB mounted DC Relay M SERIES - MKP (Pack of 10) is an electrical device or component that is used to control or switch an electrical circuit by mechanically or magnetically opening or closing electrical contacts. Relays are commonly used to control high-voltage and high-current electrical devices with a low-voltage control signal.Input: A relay typically has an input side and an output side. The input side is where you provide a low-voltage control signal, usually from a switch, sensor, or some other control device. This signal can be as low as a few volts. Coil: The input side of the relay includes a coil of wire. When the control signal is applied to the coil, it creates a magnetic field around it. Contacts: The output side of the relay has one or more sets of electrical contacts that are mechanically connected to the coil. These contacts can be in one of two states: normally open (NO) or normally closed (NC). Normally Open (NO): In this state, the relay contacts are open, and no electrical current can flow through the circuit. Normally Closed (NC): In this state, the relay contacts are closed, allowing electrical current to flow through the circuit. Activation: When the control signal energizes the coil by creating a magnetic field, it causes the relay's contacts to change state. If the relay was initially in the NO state, it will switch to the NC state, and vice versa. This effectively opens or closes the electrical circuit on the output side of the relay. Relays serve various purposes, including: Switching high-power loads: Relays are often used to control devices that require high voltage or high current, such as motors, lights, heaters, or solenoids. Isolation: Relays can provide electrical isolation between the control circuit and the load circuit. This helps protect sensitive control components from voltage spikes or interference in the load circuit. Signal amplification: Relays can amplify a weak control signal to switch a more substantial load. Remote control: Relays allow for remote control of electrical devices by using a low-voltage control signal. Automation and control systems: They are a fundamental component in automation and control systems, allowing for the sequencing and control of various devices and processes

Type of Product : DC Relay

Color : Transparent

No. of Pole : 3 Pole

Series : M SERIES - MKP

Page 1 of 2 results