Showing 40 out of 72 products
Material : Cast Iron
Type of Product : Dirt Box Strainer
Standard : IS 1538 Part lV & VI
Model No : PV-402A
Type of Product : Non Return Valve
Test Pressure : 1.6 MPa
Body Material : Cast Iron
Disc Type : Cast Iron as per IS 210 FG 200
End Connection Type : Flanged
End Details : Flanged Ends as per IS 1538
Hinge Pin : Stainless Steel as per IS 6603
Seat Ring : Bronze as per IS 318 Gr. LTB 2
Body : Cast Iron as per IS 210 FG 200
Cover : Cast Iron as per IS 210 FG 200
Stud : Carbon Steel as per IS 1363
Nut : Carbon Steel as per IS 1363
Washer : Carbon Steel as per IS 1363
Hinges : Cast Iron as per IS 210 FG 200
Face : Disc Face - Rubber as per IS 638 Type B
Plug : Side Plug- Stainless Steel as per IS 6603
Model No : PV-102A
Type of Product : Angle Globe Valve
Disc Type : Renewable Disc
Seat Type : Renewable Set
Working Pressure : Max. BOP 13 Kg/cm2
Product Standard : BS 5152 / Din 86251
End Details : Flanged ends as per DIN 2533 Raised Face
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Material : Cast Iron
End Connection Type : Flanged
Working Temperature : Max. 220°C
Trims Material : Stainless Steel (AISI 410)
Gland Packing : Braided Graphited as per IS 4687
Pressure Rating : PN 16
Stud : Carban Steel as per IS 1367
Nut : Carban Steel as per IS 1367
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Hydraulic Test Pressure : Body 26 Kg/cm2, Seat 17.3 Kg/cm2(Steam)
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Washer : Carban Steel as per IS 1367
Type of Product : Thermodynamic Steam Trap
Material : Cast Stainless Steel
Model No : PV-301
End Connection Type : Screwed
Working Pressure : Max. BOP 31.6 Kg/Cm2
End Details : Screwed Female BSP Taper Threads
Working Temperature : Max. 400°C
Hydraulic Test Pressure : 63.3Kg/Cm2
Body & Bonnet : Stainless Steel as per AISI 420
Strainer : Perforated SS Sheet as per AISI 304
Disc Type : Stainless Steel as per AISI 420
Plug : Stainless Steel as per AISI 420
Related Searches
Test Pressure : 1.6 MPa
Type of Product : Sluice Valve
End Connection Type : Flanged
Model No : PV-401A
Gland Packing : Jute/Hemp as per IS 5414
End Details : Flanged Ends as per IS 1538
Wedge : Bronze as per IS 318 Gr. LTB 2
Gasket : Rubber as per IS 638 Type B
Body Material : Cast Iron
Body & Bonnet : Cast Iron as per IS 210 FG 200
Nut : Carbon Steel as per IS 1363
Handwheel : Cast Iron as per IS 210 FG 200
Seat Ring : Bronze as per IS 318 Gr. LTB 2
Bolts : Carbon Steel as per IS 1363
Stem : Stainless Steel as per IS 6603
Type of Product : Butterfly Valve
Body : S.G. Iron as per ASTMA 536
End Connection Type : Flanged End
Model No : PV-403G
Test Pressure : 2.2 Mpa
Body Material : SG Iron
End Details : Compatible to insertion between flanges of Bs10 Table D,E,F ASA Class 150
Stem : Stainless Steel as per IS 6603
Disc Material : S.G Iron Disc AS PER ASTMA/536
Bush : PTFE as per BS EN 12086-1
Lining Material : EPDM as per IS 5192-1
Nut : Carbon Steel as par IS 1367
Lock Plate Material : Carbon Steel as par IS 2062
Bolts : Carbon Steel as par IS 1367
Lever : Carbon Steel as per BS 960
Test Pressure : 1.0/1.6 MPa
Type of Product : Sluice Valve
End Connection Type : Flanged
Model No : PV-401C
Gland Packing : Jute/Hemp as per IS 5414
End Details : Flanged Ends as per IS 1538
Disc Type : Hollow Wedge
Wedge : Bronze as per IS 318 Gr. LTB 2
Gasket : Rubber as per IS 638 Type B
Body Material : Cast Iron
Body & Bonnet : Cast Iron as per IS 210 FG 200
Nut : Carbon Steel as per IS 1363
Handwheel : Cast Iron as per IS 210 FG 200
Seat Ring : Bronze as per IS 318 Gr. LTB 2
Bolts : Carbon Steel as per IS 1363
Stem : Stainless Steel as per IS 6603
Body : Cast Iron as per IS 210 FG 200
Test Pressure : 21.1 Kg/cm²
Body Material : Cast Iron
End Details : Screwed Female Ends
Type of Product : Y Type Strainer
Model No : PV-407
End Connection Type : Screwed Female
Gasket : Steam Jointing Sheet as per 2712 Gr. W/3
Cover : Cast Iron as per IS 210 FG 200
Mesh Type : Stainless Steel as per IS 6603
Model No : PV-102B
Type of Product : Stop & Non Return Valve
Material : Cast Iron
Working Pressure : Max. BOP 13 Kg/cm2
Product Standard : BS 5152 / Din 86251
Disc Type : Renewable Disc
Working Temperature : Max. 220°C
Pressure Rating : PN 16
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Seat Type : Renewable Set
End Connection Type : Flanged
End Details : Flanged ends as per DIN 2533 Raised Face
Trims Material : Stainless Steel (AISI 410)
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Stud : Carban Steel as per IS 1367
Nut : Carban Steel as per IS 1367
Hydraulic Test Pressure : Body 26 Kg/cm2, Seat 17.3 Kg/cm2(Steam)
Washer : Carban Steel as per IS 1367
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Gland Packing : Braided Graphited as per IS 4687
Model No : PV-101C
Type of Product : Stop & Non Return Valve
Material : Cast Iron
Working Pressure : Max. BOP 13 Kg/cm2
Product Standard : BS 5152/Din 86251
Disc Type : Renewable Disc
Working Temperature : Max. 220°C
Pressure Rating : Till 150 mm PN 16 & For 200 mm PN 10
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Seat Type : Renewable Set
End Connection Type : Flanged
End Details : Flanged ends as per DIN 2533 Raised Face
Trims Material : Stainless Steel (AISI 410)
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Stud : Carban Steel as per IS 1367
Nut : Carban Steel as per IS 1367
Hydraulic Test Pressure : Body 26 Kg/cm2, Seat 17.3 Kg/cm2(Steam)
Washer : Carban Steel as per IS 1367
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Gland Packing : Braided Graphited as per IS 4687
Type of Product : Vertical Inverted Steam Trap
Material : Cast Iron
Model No : PV-109
End Connection Type : Female
Working Pressure : Max. BOP 150 Psi (g)
End Details : Female Ends to BSP Parallel
Working Temperature : Max. 220°C
Pressure Rating : Class 150
Hydraulic Test Pressure : Body 300 Psi (g)
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Bucket : Stainless Steel as per AISI 304
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Type of Product : Fusible Plug
Model No : PV-413A
Pattern Type : One Piece Design
End Connection Type : Screwed
Material : Bronze
Working Temperature : Max. 228°C
Working Pressure : 250 Psi (g)
End Details : Male end to BSP Taper
Hydraulic Test Pressure : Body 500 Psi (g)
Body & Bonnet : Bronze as per IBR 282 (A) (IV) Gr.B
Fusible Alloy : Lead tin Alloy as per IBR 333
Type of Product : Butterfly Valve
Body : S.G. Iron as per ASTMA 536
End Connection Type : Flanged End
Model No : PV-403I
Test Pressure : 2.2 Mpa
Body Material : SG Iron
End Details : Compatible to insertion between flanges of BS 10 Table
D, E, F, ASA Class-150, 300 IS 6392 Table 17
Stem : Stainless Steel as per IS 6603
Disc Material : S.S. 304 Disc CF-8
Bush : PTFE as per BS EN 12086
Lining Material : EPDM as per IS 5192-1
Nut : Carbon Steel as par IS 1367
Lock Plate Material : Carbon Steel as par IS 2062
Bolts : Carbon Steel as par IS 1367
Lever : Carbon Steel as per BS 960
Model No : PV-404B
Type of Product : Dual Plate Check Valve
Test Pressure : 1.6 Mpa
Body Material : Cast Iron
End Connection Type : Flanged End
Spring : Stainless Steel as per IS 6603
End Details : Compatible to insertion between flanges of BS 10 Table
D, E, F, ASA Class-150, DIN PN-16
Body : Cast Iron as per IS 210 FG 200
Lining Material : Rubber
Washer : Stainless Steel as per IS 6603
Pin Material : Stainless Steel as per IS 6603
Hook : Carbon Steel as par IS 1367
Flap : S.S. 304 as per ASTMA 351 CF/8
Body : Cast Iron as per IS 210 FG 200
Test Pressure : 21.1 Kg/cm2
Body Material : Cast Iron
End Details : Flanged Ends
Type of Product : T Type Strainer
Model No : PV-417
End Connection Type : Flanged End
Gasket : Steam Jointing Sheet as per 2712 Gr. W/3
Cover : Cast Iron as per IS 210 FG 200
Mesh Type : Stainless Steel as per IS 6603
Type of Product : Ball Valve
Body : Cast Iron as per IS 210 FG 220
Nut : Carbon Steel as par IS 1367 & 1363
Test Pressure : 1.6 Mpa
Body Material : Cast Iron
Stem : Stainless Steel as per IS 6603
Ball : Stainless Steel as per IS 6603
Model No : PV-405
End Details : Screwed Female Ends
Gland Packing : PTFE as per BS EN 12086-1
Lever : Carbon Steel as per IS 1367
End Connection Type : Screwed Female End
RING : PTFE as per BS EN 12086-1
Connector : Cast Iron as per IS 210 FG 220
Type of Product : Ball Valve
Trim : Aisi304
Standard : Bs- 5351
Port Opening : Full Bore
Test Pressure : B.t.p -100 Bar (hyd)
Body Material : Stainless Steel
Stem : Aisi304
Ball : Aisi304
Seat Type : Renewable Seats
Model No : PV-419
End Details : Screwed Female BSP Parallel
Pressure Class : Pressure/Class Rating- 1000 Wog
Gland Packing : Teflon PTFE
End Connection Type : Screwed Female
Seat Ring : Teflon PTFE
Test Pressure : 16 Kg/cm²
Type of Product : Kinetic Air Valve
Model No : PV-411A
End Connection Type : Flanged
Float : Timber Core with Rubber Coating
Body Material : Cast Iron
Bolts : Carbon Steel as per IS 1363
Nut : Carbon Steel as per IS 1363
Body : Cast Iron as per IS 210 FG 200
Cover : Cast Iron as per IS 210 FG 200
Orifice : Stainless Steel Rubber Coated as per IS 6603
End Details : Flanged end as per IS 1538
Model No : PV-101A
Type of Product : Globe Valve
Disc Type : Renewable Disc
Seat Type : Renewable Set
Working Pressure : Max. BOP 13 Kg/cm2
Product Standard : BS 5152/Din 86251
End Details : Flanged ends as per DIN 2533 Raised Face
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Material : Cast Iron
End Connection Type : Flanged
Working Temperature : Max. 220°C
Trims Material : Stainless Steel (AISI 410)
Gland Packing : Braided Graphited as per IS 4687
Pressure Rating : Till 150 mm PN 16 & For 200 mm PN 10
Stud : Carban Steel as per IS 1367
Nut : Carban Steel as per IS 1367
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Hydraulic Test Pressure : Body 26 Kg/cm2, Seat 17.3 Kg/cm2(Steam)
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Washer : Carban Steel as per IS 1367
Working Pressure : Max. BOP 350 Psi (g)
Working Temperature : Max. 400°C
End Details : Flanged ends to BS10 Table J
Material : Cast Carbon Steel
Type of Product : Y Type Strainer
Model No : PV-207
End Connection Type : Flanged
Strainer : Perforated S.S. Sheet as per AISI 304
Hydraulic Test Pressure : Body 700 Psi (g)
Body & Bonnet : Carbon Steel as per ASTM A 216 Gr WCB
Plug : Stainless Steel as per AISI 420
Model No : PV-214
Type of Product : Horizontal Lift Check Valve
Material : Cast Steel
Working Pressure : BOP 10.54 Kg/cm2
Product Standard : BS 1873
Disc Type : Renewable Disc
Working Temperature : Max. 260°C
Pressure Rating : Class 150
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Seat Type : Renewable Seat
End Connection Type : Flanged
End Details : Flanged ends as per ANSI B 16.5 CL 150 R.F
Trims Material : Stainless Steel (AISI 410)
Stud : Alloy Steel as per ASTM A 193 Gr. B7
Nut : Alloy Steel as per ASTM A 194 Gr. 2H
Hydraulic Test Pressure : Body 38 Kg/cm2, Seat 22 Kg/cm2
Locking Screw : Stainless Steel as per AISI 304
Type of Product : Gear Operated Butterfly Valve
End Connection Type : Short Wafer Type
Model No : PV-403F
Operated Type : Gear Operated
Test Pressure : 1.0/1.6 Mpa
Body Material : Cast Iron
End Details : Compatible to insertion between flanges of Bs10 Table D,E,F ASA Class 150
Stem : Stainless Steel as per IS 6603
Disc Material : S.S AISI 316 Disc CF-8
Bush : PTFE as Per BS EN 12086-1
Lining Material : EPDM as Per IS 5192-1
Pin Type : Dowel Pin- Carbon Steel as per BS 1574
Nut : Carbon Steel as per IS 1367
Lock Plate Material : Carbon Steel as per IS 2062
Bolts : Carbon Steel as per IS 1367
Lever : Carbon Steel as per BS 960
Body & Bonnet : Cast Iron as per IS 210 FG 200
Model No : PV-415
Type of Product : Wafer Type Check Valve
Body Material : SG Iron
Disc Type : Renewable Disc (EPDM)
Seat Type : Renewable Seat (EPDM)
End Connection Type : Flanged End
End Details : Insertion Between Flanges of AISI CLASS 150
Body : S.G. Iron as per ASTMA 536
Hydraulic Test Pressure : Body 24 Kg/cm2, Seat 16 Kg/Cm2Hyd
Washer : AISI 304
Flap : S.G. Iron as per ASTMA 536
Screw Type : AISI 304
Model No : PV-404A
Type of Product : Dual Plate Check Valve
Test Pressure : 1.6 Mpa
Body Material : Cast Iron
End Connection Type : Flanged End
Spring : Stainless Steel as per IS 6603
End Details : Compatible to insertion between flanges of BS 10 Table
D, E, F, ASA Class-150, DIN PN-16
Body : Cast Iron as per IS 210 FG 200
Lining Material : Rubber
Washer : Stainless Steel as per IS 6603
Pin Material : Stainless Steel as per IS 6603
Hook : Carbon Steel as par IS 1367
Flap : S.G. Iron as per ASTMA 536
Body : Cast Iron as per IS 210 FG 200
Test Pressure : 21.1 Kg/cm²
Body Material : Cast Iron
End Details : Flanged Ends
Type of Product : Y Type Strainer
Model No : PV-418
End Connection Type : Flanged
Gasket : Steam Jointing Sheet as per 2712 Gr. W/3
Cover : Cast Iron as per IS 210 FG 200
Mesh Type : Stainless Steel as per IS 6603
Bolts : Carbon Steel as per IS 1363
Nut : Carbon Steel as per IS 1363
Test Pressure : 16 Kg/cm²
Type of Product : Kinetic Air Valve
Model No : PV-411
End Connection Type : Flanged
Float : Timber Core with Rubber Coating
Body Material : Cast Iron
Bolts : Carbon Steel as per IS 1363
Nut : Carbon Steel as per IS 1363
Body : Cast Iron as per IS 210 FG 200
Cover : Cast Iron as per IS 210 FG 200
Orifice : Stainless Steel Rubber Coated as per IS 6603
End Details : Flanged end as per IS 1538
Test Pressure : 16 Kg/cm²
Type of Product : Single Air Valve
Model No : PV-409
End Connection Type : Screwed Male
Float : Timber Core with Rubber Coating
Body Material : Cast Iron
Bolts : Carbon Steel as per IS 1363
Nipple Type : Hex Nipple - Carbon Steel as per IS 1367
Nut : Carbon Steel as per IS 1363
Body : Cast Iron as per IS 210 FG 200
Cover : Cast Iron as per IS 210 FG 200
Orifice : Stainless Steel Rubber Coated as per IS 6603
End Details : Screwed Male end as per IS 554
Model No : PV-202
Type of Product : Globe Valve
Disc Type : Renewable Disc
Seat Type : Renewable Disc
Product Standard : BS 5160 / DIN 2401
End Details : Flanged ends as per DIN 2545 Raised Face
Gasket : Spiral Wound Gasket S.S. 304 Graphite Filled
Material : Cast Steel
End Connection Type : Flanged
Working Temperature : Max. 425°C
Trims Material : Stainless Steel (AISI 410)
Gland Packing : Braided Graphite as per IS 4687
Pressure Rating : PN 40
Stud : Alloy Steel as per ASTM A 193 Gr. B7
Nut : Alloy Steel as per ASTM A 194 Gr. 2H
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Hydraulic Test Pressure : Body 76 Kg/cm2, Seat 38 Kg/cm2(Steam)
Body & Bonnet : Cast Steel as per ASTMA 216 Gr. WCB
Model No : PV-201
Type of Product : Globe Valve
Disc Type : Renewable Disc
Seat Type : Renewable Disc
Product Standard : BS 5160 / DIN 2401
End Details : Flanged ends as per DIN 2545 Raised Face
Gasket : Spiral Wound Gasket S.S. 304 Graphite Filled
Material : Cast Steel
End Connection Type : Flanged
Working Temperature : Max. 425°C
Trims Material : Stainless Steel (AISI 410)
Gland Packing : Braided Graphite as per IS 4687
Pressure Rating : PN 40
Stud : Alloy Steel as per ASTM A 193 Gr. B7
Nut : Alloy Steel as per ASTM A 194 Gr. 2H
Handwheel : Cast Iron as per IS 210 Gr. FG 200
Hydraulic Test Pressure : Body 76 Kg/cm2, Seat 38 Kg/cm2(Steam)
Body & Bonnet : Cast Steel as per ASTMA 216 Gr. WCB
Model No : PV-204
Type of Product : Horizontal Lift Check Valve
Material : Cast Steel
Product Standard : BS 5160 / DIN 2401
Disc Type : Renewable Disc
Working Temperature : Max. 425°C
Pressure Rating : PN 40
Gasket : Spiral Wound Gasket S.S. 304 Graphite Filled
Seat Type : Renewable Disc
End Connection Type : Flanged
End Details : Flanged ends as per DIN 2545 Raised Face
Trims Material : Stainless Steel (AISI 410)
Body & Bonnet : Cast Steel as per ASTMA 216 Gr. WCB
Stud : Alloy Steel as per ASTM A 193 Gr. B7
Nut : Alloy Steel as per ASTM A 194 Gr. 2H
Hydraulic Test Pressure : Body 76 Kg/cm2, Seat 38 Kg/cm2(Steam)
Model No : PV-203
Type of Product : Horizontal Lift Check Valve
Material : Cast Steel
Product Standard : BS 5160 / DIN 2401
Disc Type : Renewable Disc
Working Temperature : Max. 425°C
Pressure Rating : PN 40
Gasket : Spiral Wound Gasket S.S. 304 Graphite Filled
Seat Type : Renewable Disc
End Connection Type : Flanged
End Details : Flanged ends as per DIN 2545 Raised Face
Trims Material : Stainless Steel (AISI 410)
Body & Bonnet : Cast Steel as per ASTMA 216 Gr. WCB
Stud : Alloy Steel as per ASTM A 193 Gr. B7
Nut : Alloy Steel as per ASTM A 194 Gr. 2H
Hydraulic Test Pressure : Body 76 Kg/cm2, Seat 38 Kg/cm2(Steam)
Model No : PV-106
Type of Product : Swing Check Valve
Material : Cast Iron
Working Pressure : Max. BOP 10.54 Kg/cm2
Product Standard : BS 5153
Disc Type : Renewable Disc
Working Temperature : Max. 220°C
Pressure Rating : Class 125
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Seat Type : Renewable Set
End Connection Type : Flanged
End Details : Flanged ends as per ANSI B 16.1 CL-125 Flat Face
Trims Material : Stainless Steel (AISI 410)
Stud : Carban Steel as per IS 1367
Nut : Carban Steel as per IS 1367
Hydraulic Test Pressure : Body 21 Kg/cm2, Seat 14 Kg/cm2(Steam)
Washer : Carban Steel as per IS 1367
Locking Screw : Stainless Steel as per AISI 304
Model No : PV-105
Type of Product : Accessible feed Check valve
Material : Cast Iron
Working Pressure : Max. BOP 10.54 Kg/cm2
Disc Type : Renewable Disc
Working Temperature : Max. 220°C
Pressure Rating : PN 16
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Seat Type : Renewable Set
End Connection Type : Flanged
End Details : Flanged ends as per BS 10 Table F, Flat face
Trims Material : Stainless Steel (AISI 410)
Stud : Carban Steel as per IS 1367
Nut : Carban Steel as per IS 1367
Hydraulic Test Pressure : Body 21 Kg/cm2, Seat 14 Kg/cm2(Steam)
Washer : Carban Steel as per IS 1367
Model No : PV-104
Type of Product : Angle Lift Check Valve
Material : Cast Iron
Working Pressure : Max. BOP 13 Kg/cm2
Product Standard : BS 5153
Disc Type : Renewable Disc
Working Temperature : Max. 220°C
Pressure Rating : PN 16
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Seat Type : Renewable Set
End Connection Type : Flanged
End Details : Flanged ends as per DIN 2533 Raised Face
Trims Material : Stainless Steel (AISI 410)
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Stud : Carban Steel as per IS 1367
Nut : Carban Steel as per IS 1367
Hydraulic Test Pressure : Body 26 Kg/cm2, Seat 17.3 Kg/cm2(Steam)
Washer : Carban Steel as per IS 1367
Model No : PV-103A
Type of Product : Horizontal Lift Check Valve
Material : Cast Iron
Working Pressure : Max. BOP 13 Kg/cm2
Product Standard : BS 5153
Disc Type : Renewable Disc
Working Temperature : Max. 220°C
Pressure Rating : Till 150 mm PN 16 & For 200 mm PN 10
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Seat Type : Renewable Set
End Connection Type : Flanged
End Details : Flanged ends as per DIN 2533 Raised Face
Trims Material : Stainless Steel (AISI 410)
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Stud : Carban Steel as per IS 1367
Nut : Carban Steel as per IS 1367
Hydraulic Test Pressure : Body 26 Kg/cm2, Seat 17.3 Kg/cm2(Steam)
Washer : Carban Steel as per IS 1367
Working Pressure : Max. BOP 10.55 Kg/cm2
Working Temperature : Max. 220°C
End Details : Flanged Ends
Material : Cast Iron
Pressure Rating : PN 10
Type of Product : Y Type Strainer
Model No : PV-108
End Connection Type : Flanged
Strainer : Stainless Steel as per AISI 304
Hydraulic Test Pressure : Body 17 Kg/cm2
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Drain Plug : Cast Iron as per IS 1367
Working Pressure : Max. BOP 13 Kg/cm2
Working Temperature : Max. 220°C
End Details : Screwed Female Ends
Material : Cast Iron
Pressure Rating : PN 10
Type of Product : Y Type Strainer
Model No : PV-107
End Connection Type : Screwed
Strainer : Stainless Steel as per AISI 304
Hydraulic Test Pressure : Body 26 Kg/cm2
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Type of Product : Inverted Steam Trap
Material : Cast Iron
Model No : PV-109A
End Connection Type : Female
Working Pressure : Max. BOP 150 Psi (g)
End Details : Female Ends to BSP Parallel
Working Temperature : Max. 220°C
Pressure Rating : Class 150
Hydraulic Test Pressure : Body 300 Psi (g)
Gasket : Steam Jointing Sheet as per IS 2712 Gr. W/3
Bucket : Stainless Steel as per AISI 304
Body & Bonnet : Cast Iron as per IBR 86 to 93 Gr. A
Model No : PV-209
Type of Product : Moisture Seperator
Material : Cast Carbon Steel
Working Pressure : Max. BOP 350 Psi (g)
Working Temperature : Max. 400°C
Hydraulic Test Pressure : Body 700 Psi (g)
End Connection Type : Flanged
End Details : Flanged ends to BS10 Table J
Page 1 of 2 results
| Product Name | Expected Price | Dispatch Time | Discount |
|---|---|---|---|
| Chubu Corporation SUS Floor Drain Trap for Waterproof Layer, T5B-A(SU)-75 | ₹51,919 | 30 days | -- |
| Chubu Corporation Floor Cleaning Port for Non Waterproof Layer 45398309, COA-A 150 | ₹31,859 | 30 days | -- |
| Chubu Corporation Floor Cleaning Port for Waterproof Layer, COB-A 100 | ₹22,419 | 30 days | -- |
| Finolex 203.2 mm (8 Inch) PVC, EPDM Wafer Type Butterfly Valve, 2316 | ₹9,675 | 4 days | 12.27% OFF |
| DKC Size 150 VP PVC Straight Pipe Single Screw 45414829, VPS-150-L500 | ₹8,495 | 30 days | -- |
| Zoloto 80 mm Flanged Cast Iron Sluice Valve 1079 B | ₹13,637 | 7 days | -- |
| Chubu Corporation Floor Cleaning Port for Non-waterproof Layer, COA-A-100 | ₹14,159 | 30 days | -- |
| Chubu Corporation SUS Floor Drain Trap for Non Waterproof Layer 45398318, T5A-A(SU)-75 | ₹46,019 | 30 days | -- |
| DKC RL-4S Type Roof Drain Size 150 for Outdoor Use 58184917, RL-4S-K | ₹33,039 | 30 days | -- |
Subscribe to Newsletter
Sign up to get exclusive offers from our favorite brands and to be well up in the news
